Sharp XL-UH220H operation manual General control, Basic Operation

Page 12

XL-UH220H

General control

Basic Operation

To turn the power on

Press the ON/STAND-BY button to turn the power on.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

Illumination light control

When the power is turned on, ring around the volume control light up. To turn on/off the light, hold down the CLEAR/DIMMER button on the remote control for more than 2 seconds.

Volume auto fade-in

If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16 and fades in to the last set level.

Volume control

Main unit operation:

When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease.

Remote control operation:

Press the VOLUME (+ or -) button to increase or decrease the volume.

0	.....	30 MAXIMUM

Bass control

When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "X-BASS" will appear. To cancel the extra bass mode, press the X-BASS/DEMO

button on the remote control.

Equaliser

When the EQUALIZER MODE button on the remote control is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER MODE button repeatedly until the desired sound mode appears.

		FLAT		No equalisation.
				For rock music.
		ROCK		For rock music.
				For classical music.
		CLASSIC		For classical music.
				For pop music.
		POPS		For pop music.
				Vocals are enhanced.
		VOCAL		Vocals are enhanced.
				For jazz.
		JAZZ
		JAZZ

12

Image 12

Contents XL-UH220H Thank you for purchasing this Sharp productSpecial notes General InformationFor other countries Special Note Contents AccessoriesXL-UH220HPrecautions Volume controlGeneral Controls and indicators Front panelDisc Trays Display Rear panelSpeaker system Remote control System connections Preparation for UseUse Preparation forAerial connection Speaker connectionAC power connection Demonstration modeFor External FM aerialRemote control Battery installationTest of the remote control Close the cover Precautions for battery useGeneral control Basic OperationSetting the clock Remote Control only To readjust the clockTo conﬁrm the time display To change the 24-hour or 12-hour displayAuto power on function Auto power off functionXL-UH220HListening to a CD or MP3/WMA disc CD or MP3/WMA disc PlaybackDisc Press the OPEN/CLOSE button to close the disc trayTo exchange other discs whilst playing a disc To remove the discsVarious disc functions Advanced CD or MP3/WMA disc playback Direct track searchFor example, to choose To stop playbackRepeat play Random playTo cancel the programmed play mode Advanced CD playbackProgrammed play Adding tracks to the programmeMP3/WMA folder mode only for MP3/WMA ﬁles MP3/WMA disc PlaybackCD or About folder playback orderProcedure to playback MP3/WMA disc To playback CD-R/RWListening to USB mass storage device / MP3 Player USB Memory PlaybackTo remove USB memory device To cancel random play Press the / button. R will disappear Advanced USB playbackTo repeat all tracks To random play all tracksTuning Auto tuningListening to the radio RadioTo scan the preset stations To erase entire preset memoryMemorising a station To recall a memorised stationUsing the Radio Data System RDS Advanced FeaturesInformation provided by RDS Using the Auto Station Programme Memory Aspm To erase all of the contents of preset memoryTo stop the Aspm operation before it is complete To recall stations in memory Lect the programme typeSeconds, press the RDS PTY button again If you select the traffic programme To specify station names and select stations manuallyAdvanced Timer and sleep operation Remote Control only Timer playbackAdjust the volume using the Volume control, and then Do not turn the volume up too highPress the ON/STAND-BY button to enter the power stand By modeWhen the preset time is reached, playback will start Daily timerChecking the timer setting in the timer stand-by mode Cancelling the timer setting in the timer stand-by modeTo cancel the sleep operation Sleep operationTo confirm the remaining sleep time Headphones Auto power on function USB/AUXXL-UH220HEnhancing your system Listening to the playback sounds from VCR, DVD, etcTroubleshooting chart Symptom Possible causeReferences Subwoofer connectionClearing all the memory reset If such a problem occurs, do the followingTuner CondensationMaintenance Cleaning the cabinetBefore transporting the unit Care of compact discsSpecifications AmplifierSpeaker Memo Memo 1300 135 Warranty