JL Audio SB-J-GCHER3/10W1v2/TN, SB-J-GCHER3/10W1v2/GA Remove the tailgate’s bottom sill plate

Page 2

S T E P 4

Remove the tailgate’s bottom sill plate.

S T E P 5

Remove the false floor.

Remove the two mounting bolts that secure the flooring to the vehicle.

S T E P 6

Remove the flooring from the vehicle.

S T E P 7

With a small flat head screw driver, pop off the small cover that is located on the top half of the c-pillar.

With Phillips head screw driver, remove the screw that has been exposed.

Remove this top half of the c-pillar.

SB-J-GCHER3/10W1v2_INSTR_SKU#011235

S T E P 8

With a Phillips head screw driver, remove the screw from the front section of the plastic side panel.

S T E P 9

With a Phillips head screw driver, remove the screw from the rear section of the plastic panel.

S T E P 1 0

With an hex key, remove the screw and D-ring from the rear section of the plastic panel.

S T E P 1 1

Remove the tailgate’s upper sill plate.

Page 2 • JL Audio, Inc 2007

Continued on Next Page

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Remove any contents from the cargo area Remove the Stealthbox from the vehicleRemove the tailgate’s upper sill plate 2 JL Audio, Inc Remove the tailgate’s bottom sill plateRemove the flooring from the vehicle Remove the plastic panel from the vehicle Remove the d-pillar plastic coverRemove the right rear door’s sill plate 3 JL Audio, IncWire and mount the woofer back into the Stealthbox Place the false floor back into the vehicle, from Step5 JL Audio, Inc You have completed the installation for this modelSecure the c-pillar cover back into place
Top Page Image Contents