Connecting players
Set phono equalizer switch button by the type of your cartridge to be used MM or MC.
ENGLISH
nnBALANCED Jacks
Getting started
Turntable
NOTE
• Connecting a ground wire may produce noise. In this case, do not make the ground connection.
GND | AUDIO | |
OUT | ||
| ||
| L | |
| R |
Connect the ground wire from your turntable here.
L 
R 
CD player
AUDIO
AUDIO OUT
L 
L 
R 
R 
Super Audio CD player
|
| Tuner |
|
| AUDIO |
|
| AUDIO OUT |
L | L | L |
R | R | R |
BD player
|
| AUDIO |
|
| AUDIO OUT |
L | L | L |
R | R | R |
The BALANCED jacks on this unit are equipped with XLR connectors that are widely used on professional equipment. Their features are listed below.
•The 3 pin construction enables the musical signal to be transmitted as a balanced signal, with little effect from external noise
•The detachable locking mechanism minimizes connector play and enhances connection reliability.
The XLR connector for professional use is internally wired in either of the following two systems.
•USA system (w PIN=COLD e PIN=HOT)
COLD 2 | 1 GND |
HOT 3
•European system (w PIN=HOT e PIN=COLD)
HOT 2 3 1 GND
COLD
If a product that employs the European system is connected with this unit via a balanced cable, the reproduced signal may be
To correct the inversion, connect the one side XLR connector reversing the w PIN and e PIN.
Basic connections Basic operation Advanced connections Advanced operation Explanation terms Troubleshooting Specifications Index
9