ENGLISH
Specifications
Index
• RMS Power output: | 100 W × 2 (8 Ω) |
(20 Hz - 20 kHz | 200 W × 2 (4 Ω) |
• Total harmonic distortion: | 0.01 % |
(20 Hz - 20 kHz |
|
• Output band width: (8 Ω, 0.05 %) | 5 Hz − 45 kHz |
• Frequency response: (CD, 1 W, 8 Ω load) | 5 Hz − 120 kHz ± 3 dB |
• Damping factor: (8 Ω, 20 Hz − 20 kHz) | 100 |
• Input sensitivity/Input impedance |
|
PHONO (MC): | 260 µV / 100 Ω |
PHONO (MM): | 2.7 mV / 47 kΩ |
vvA
Accessories·························································· 1 Adjust the levels (Left and Right)························ 12 Adjust the tone··················································· 12 Adjust the volume··············································· 11 Auto standby mode············································ 20
vvB
Batteries······························································· 2
vvP
Protection circuit············································· 7, 21
vvR
Remote control····················································· 5
vvS
Speaker impedance········································ 7, 21
BALANCED: | 480 mV / 40 kΩ |
CD/LINE: | 240 mV / 20 kΩ |
P. DIRECT IN: | 1.7 V / 20 kΩ |
• Output voltage/Output impedance |
|
PRE OUT: | 1.9 V / 220 Ω |
• Maximum allowable PHONO input level (1 kHz) |
|
MC: | 10 mV |
MM: | 105 mV |
• RIAA deviation: (20 Hz−20 kHz) | ± 0.5 dB |
• S/N |
|
PHONO (MC): | 76 dB (0.5 mV Input, 1 W Output) |
PHONO (MM): | 88 dB (5 mV Input, 1 W Output) |
BALANCED: | 109 dB (4 V Input, Rated output) |
CD/LINE: | 108 dB (2 V Input, Rated output) |
• Tone control |
|
BASS (50 Hz): | ± 8 dB |
TREBLE (20 kHz): | ± 8 dB |
• Power requirement: | AC 120 V, 60 Hz |
• Power consumption (UL60065): | 300 W |
• Standby power consumption: | 0.2 W |
For the purpose of improvement, the specifications and design are subject to change without notice.
vvC
Cable
Balance cable····················································· 6
Speaker cable····················································· 6
Condensation························································ 2
Connection
5.1
vvF
F.C.B.S. connection············································ 14 Front panel···························································· 4
vvH
High frequency range········································· 12
vvI
INPUT SELECTOR·············································· 11 Inserting the batteries··········································· 2
vvL
Low frequency range·········································· 12
vvM
MM/MC cartridge select····································· 21 Muting the sound··············································· 13
24