Basic operation
Before use
Turning the power on |
| Turning the power off |
Press X ON/OFF on the unit. |
| Press X ON/OFF on the unit. |
• Power is turned on. |
| • Power is turned off. |
• The power indicator lights in blue. |
| • All indicators will turn off. |
•The unit will be ready to start playback after several seconds.
Turning the power standby
Press X AMP.
• The power is set to the standby mode.
•The Standby status indicator lights in
red.
•Press X AMP to turn on power from standby mode.
•You can also turn on power by using either INPUT SELECTOR on this unit from standby mode.
NOTE
Power continues to be supplied to some of the circuitry even when the power is in the standby mode. When leaving home for long periods of time or when going on vacation, either press X ON/OFF to turn off the power, or unplug the power cord from the power outlet.
ENGLISH
Starting playback
1
2 Use INPUT SELECTOR on the unit or INPUT dfon the remote control to select the source.
• The input source changes as follows with each press of the button:
CD 
BALANCED | RECORDER1 | |||
|
|
|
| |
|
|
|
|
|
PHONO |
| RECORDER2 | ||
| ||||
3 Start playing back the source.
4 Adjust the VOLUME df on the unit or remote control to the desired level.
Getting started Basic connections Basic operation Advanced connections Advanced operation Explanation terms Troubleshooting Specifications Index
11