Marantz PM-11S3 owner manual NnSpeaker Positioning for Super Audio Multi- channel Sound

Page 22

ENGLISH

nnSpeaker Positioning for Super Audio Multi- channel Sound

In order to enjoy Super Audio CD multi-channel sound with the best possible acoustics, it is recommended to position speakers as specified in ITU-R BS.775-1 of the International Telecommunication Union (ITU). Super Audio CD multi- channel discs are recorded and mixed so as to achieve the optimum effect with a speaker system laid out as specified in ITU-R BS.775-1.

• With Super Audio CD multi-channel discs, the music

signals are basically recorded using 5 channels (3 - 6

channels sometimes), but in some cases, LFE (for

subwoofer) is recorded as a sixth channel.

• Each disc indicates how many channels have been

recorded on it.

• The basic layout is 3 speakers in the front and 2 in the

Subwoofer

Front speaker (Left)

approx.110°

F.C.B.S. connection

Center speaker

Front speaker (Right)

60°

approx.110°

back since multi-channel discs usually have 5 channels.

The 2 front, 1 center and 2 surround (rear) speakers

should be set in a circle around the listening point. If using

speakers of differing sizes, adjust volume balance from

the amplifier.

• The location of the subwoofer in the figure is just for

explanatory purposes. It can be located anywhere in the

room. For connection and positioning instructions, see the

instruction manual that came with the subwoofer.

Recommended listening position

Rear speaker

 

 

 

Rear speaker

(Left Surround)

 

 

(Right Surround)

 

 

 

ITU (International Telecommunication Union)

The ITU is a special organization of the United Nations. It consists of a number of organs, one of which is the Radio Broadcasting Section.

ITU-R BS in the recommendation which consists of standards relating to broadcasting (audio) operations, one of which is the ITU-R BS.775-1 which governs “multi-channel stereo sound systems”.

18

Image 22
Contents Integrated Amplifier Page Impotant Safety Instructions Précautions d’installation Emplazamiento de la instalación Avertissements AdvertenciasGetting started About this manualAbout the remote control Inserting the batteriesFeatures Front panel Part names and functionsRear panel NnButtons for amplifier Remote controlNnButtons for Super Audio CD player Basic connections Connecting the audio equipmentConnecting cables PreparationsSpeaker impedance Connecting the speakersConnecting the speakers cables Protection circuitSpeakers a Bi-wiring connectionSpeaker connections Speaker RConnecting players NnBALANCED JacksConnecting recorders Connecting the power cord Recorder-2 Recorder-1Basic operation Turning the power on Turning the power offTurning the power standby Before useNnLeft and right channel balance Adjusting the levelsAdjusting the tone NnLow frequency rangeNnHow to Set Attenuation Level Using headphone setSwitching the illumination lamp setting Muting the soundPreparation for F.C.B.S. connection Advanced connectionsB.S. connection NnMaking the F.C.B.S. connectionNnHow to set ID number for F.C.B.S DisplayStereo complete bi-amp connection SpeakerConnection for 5.1 Multi-channel Playback Sacd multi-channel player, etcNnSpeaker Positioning for Super Audio Multi- channel Sound Explanatory purposes. It can be located anywherePre-amplifierSpeakers To PRE OUT Connectors Connecting P.DIRECT in connectorsConnecting pre out connectors Power-amplifier To input connectorsNnSetting Connecting the remote control connectorsSetting Auto standby mode Advanced operationsTroubleshooting TroubleshootingExplanation terms Symptom Cause Countermeasure NnError messagesNnAre the connections correct? VCR Specifications Index Weight / Poids / Peso 58 lbs 10 oz 26.6 kg Unit / Unité / Unidad inch mmV01