Contents | Connections | Playback | Settings | Tips | Appendix |
Connecting a playback device
You can connect turntables, tuners, CD players and network audio players to this unit.
This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect to a turntable with a low output moving coil (MC) cartridge, use a commercially available MC head amp or a
If you set this unit’s input source to “PHONO” and you accidentally increase the volume without having a turntable connected, you may hear a hum noise from the speakers.
|
|
|
|
|
|
|
|
| Network |
|
|
|
| audio |
Tuner |
| CD player |
| player |
|
|
|
|
|
|
|
|
| |
AUDIO | AUDIO |
| AUDIO | |
OUT | OUT |
| OUT | |
L R | L R |
| L R | |
Turntable
L 
R
L 
R
L 
R
AUDIO
OUT
GND |
L |
R |
L 
R
L | R | L | R |
NOTE
•The ground line (SIGNAL GND) on this unit is not a safety ground. Connect it to reduce noise when noise is excessive. Note that depending on the turntable, connecting the ground line may have the reverse effect of increasing noise. In this case, it is not necessary to connect the ground line.
|
|
|
|
|
|
|
| 18 |
|
|
Front panel |
|
| Rear panel |
|
| Remote |
| Index |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|