Marantz Comprehensive Guide to the PM6005: Manual, Troubleshooting, and Setup

Page 35

Contents

Connections

Playback

Settings

Tips

Appendix

Troubleshooting

If a problem occurs, first check the following:

1.Are the connections correct?

2.Is the unit being operated as described in the owner’s manual?

3.Are the other components operating properly?

If this unit does not operate properly, check the items listed in the table below. If the problem persist there may be a malfunction. In that case, disconnect the power immediately and contact your retail outlet.

22Power does not turn on / Power is turned off

Symptom

Cause / Solution

Page

Power does not turn on.

• Check whether the power plug is correctly inserted into the power outlet.

22

 

 

 

Power automatically turns off.

• The Auto Standby mode is set. The Auto Standby mode switches the unit to standby mode

29

 

when the unit is not operated for approximately 30 minutes. To disable the Auto Standby

 

 

mode, press and hold the SOURCE DIRECT button on the unit for more than 5 seconds when

 

 

the Auto Standby mode is enabled.

 

 

 

 

 

 

 

 

 

35

 

 

Front panel

 

 

Rear panel

 

 

Remote

 

Index

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 35
Contents PM6005 Contents Setting the remote signal receiving function SettingsAccessories Front panel Rear panel Remote Index High quality sound FeaturesTone control function High performanceEasy operation Digital Input Coaxial, OpticalI o Part names and functionsFront panel Rt y uio Q0 Rear panel Amplifier and Tuner operation Remote control unitQ1 W0 Q2 W1 QPOWER button WRemote mode select buttonCD player operation Q5 y Network audio player operationConnections Connecting devices with remote control connectorsConnecting the power cord vpage Audio cable Remote connector CableSpeaker connection Connecting the speakers cablesSpeaker A/B connection Speaker R Speaker L Bi-wiring connectionTurntable Connecting a playback deviceCD player Player Recording device Connecting a recording deviceDevices with digital Audio connectors Connecting a TV/Devices with digital audio connectorsRemotely connecting Marantz devices Connecting devices with remote control connectors22Connection to the AC outlet Connecting the power cordNnSWITCHED NnUNSWITCHEDPlayback Direct Volume df Mute Turning the power on22Turning the power off AMP PowerSelecting the input source Adjusting the volumeAdjusting the tone Selecting the speakers for audio outputPlaying CDs 22Playback in source direct mode22Playback in Loudness mode Recording starts RecordingSettings To turn the Auto Standby mode off Setting the Auto Standby modeTurning Auto Standby mode off Turning Auto Standby mode onSpeakers a Speakers B 22To set the remote control codes to AMP3 Setting remote control codesSetting remote control codes for the remote control 22To set the remote control codes to AMP2Hold down Remote Mode CD and press Enter Setting remote control codes for this unitTips ContentsWant sound playback that is faithful to the original sound Want to adjust the tone myselfTips Want to play back high quality television soundSymptom Cause / Solution Troubleshooting22Power does not turn on / Power is turned off Symptom ContentsConnectionsPlaybackSettingsTipsAppendix 22No sound comes out 22Sound is interrupted or noise occurs 22Desired sound does not come out22Supported audio formats AppendixPlayback on devices that have digital audio terminals Explanation termsSpecifications Index 22Dimensions 22Weight 16 lbs 12 oz 7.6 kgHoldings Inc 10289 00AM
Related manuals
Manual 10 pages 28.75 Kb