Kicker cx600.5 owner manual CX.5-SERIES Amplifiers, Model, Performance, Installation

	CX.5-SERIES AMPLIFIERS
	OWNER’S MANUAL
MODEL:	CX600.5
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
PERFORMANCE
Model:	CX600.5
RMS Power, AMP1 and AMP2
@ 14.4V, 4Ω stereo, ≤ 1% THD+N	40W x 4
@ 14.4V, 2Ω stereo, ≤ 1% THD+N	75W x 4
@ 14.4V, 4Ω mono, ≤ 1% THD+N	150W x 2
RMS Power, SUB channel
@ 14.4V, 2Ω mono, ≤ 1.5 % THD+N	300 x 1
@ 14.4V, 4Ω mono, ≤ 1.5 % THD+N	150 x 1
Length in [mm]	14 [360]
Height in [mm]	2-3/8 [60]
Width in [mm]	7-3/16 [180]
Frequency Response ± 1dB	AMPS 1-2: 10Hz–20kHz
	SUB: 25Hz–200Hz
Signal-to-noise Ratio	AMPS 1-2:>95dB, A-weighted, re: rated power
	SUB: >90dB, A-weighted, re: rated power
Input Sensitivity	Low Level: 125mV–5V
	High Level: 250mV–10V
Electronic Crossover	AMPS 1-2:HI/OFF [bypass], 50–200Hz, 12dB/octave;
	SUB: Variable low-pass, 50–200Hz, 24dB/octave
Bass Boost	Variable 0–12dB @ 40Hz
Subsonic Filter	24dB/Octave, Fixed @ 25Hz
Remote Bass:	Yes [sold separately]

Pro Tip: To get the best performance from your new KICKER Amplifi er and extend the warranty by 1 year, use genuine KICKER accessories and wiring.

INSTALLATION

Mounting: Choose a structurally sound location to mount your KICKER amplifi er. Make sure there are no items behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger compartment. Drill four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the amplifi er.

2

2012 CX 5-Channel Amp Rev F.indd 2

6/22/2012 3:08:47 PM