8Connect the data cable to the system board.
9Slide the second hard drive into the second hard drive bay.
10Install the first hard drive (see "Installing a Hard Drive" on page 128).
11Check all cables to be certain that they are properly connected and firmly seated.
1
2 
1 hard drive | 2 shoulder screws (4) |
12Replace the support bracket (see "Replacing the Support Bracket" on page 164).
13Replace the computer cover (see "Replacing the Computer Cover" on page 165).
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
14Connect your computer and devices to electrical outlets, and then turn them on.
15See the documentation that came with the drive for instructions on installing any software required for drive operation.
16Check the system setup for drive configuration changes (see "Entering System Setup" on page 172).
130
