5Release the clamp grip from the bracket projection on the opposite side.
CAUTION: Despite having a plastic shield, the heat sink assembly may be very hot during normal operation. Be sure that it has had sufficient time to cool before you touch it.
NOTICE: Strong thermal grease bond may exist between the processor and heat sink. Do not use excessive force to separate the heat sink assembly from the processor to avoid damaging the processor.
6Rotate the heat sink assembly upward gently, and remove it from the computer. Lay the heat sink assembly down on its top, with the thermal grease facing upward.
1
2 
7
3 
4 |
|
|
|
| 6 |
|
|
|
|
| 5 |
1 | fan | 2 | fan cover | 3 | heat sink |
4 | bracket | 5 | clamp grip | 6 | bracket projection |
7clamp lever
NOTICE: Unless a new heat sink is required for the new processor, reuse the original heat sink assembly when you replace the processor.
7Pull the release lever straight up until the processor is released.
