1 | 3 |
2 |
|
1 Media Card Reader 2 spring clamp | 3 CD or DVD drive |
NOTE: Ensure that the Media Card Reader is installed before the FlexBay cable is connected.
12Connect the FlexBay USB cable to the back of the Media Card Reader and to the internal USB connector on the system board (see "System Board Components" on page 107).
13Replace the CD or DVD drive. (see "Installing a CD or DVD Drive" on page 143).
14Replace the bezel (see "Replacing the Bezel" on page 124).
15Replace the computer cover (see "Replacing the Computer Cover" on page 165).
16Connect your computer and devices to electrical outlets, and then turn them on.
CD or DVD Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION: To guard against electrical shock, laceration by moving fan blades, or other unexpected injuries, always unplug your computer from the electrical outlet before opening the cover.
