Micro Star Computer MS- 9130 v1.x manual Fan Power Connectors CFAN1/2, SFAN1/2, NBFAN1

MS-9130 Workstation Mainboard

Fan Power Connectors: CFAN1/2, SFAN1/2, NBFAN1

The CAN1/2 (processor fan), SFAN1/2 (system fan) and NBFAN1 (Northbridge fan) support system cooling fan with +12V. It supports 3-pin head connector. When connecting the wire to the connectors, always take note that the red wire is the positive and should be connected to the +12V, the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control.

CFAN1, CFAN2

SFAN1

NBFAN1

SENSOR

+12V

GND

Fan Connector

Pin Definition

MSIRemindsYou...

Always consult the vendors for proper CPU cooling fan.

LCD Panel Connector: JLCD1

The connector is additionally provided for connection to a LCD panel, which shows information on the panel for you to identify the current status or mode of the connected system.

JLCD1		PIN	SIGNAL
1	2	1	TX
5	6	2	RX
		3	NC
		4	GND1
		5	GND0
		6	VCC

2-16