The system stops when any error is detected. The system doesn’t stop for any detected error. The system doesn’t stop for a keyboard error. The system doesn’t stop for a disk error.
The system doesn’t stop for either a disk or a keyboard error.
The settings are CHS, LBA, Large, Auto. The formatted size of the storage device. Number of cylinders.
Number of heads. Write precompensation.
Cylinder location of the landing zone. Number of sectors.
BIOS Setup
If you select Manual, related information is asked to be entered to the following items. Enter the information directly from the keyboard. This information should be provided in the documentation from your hard disk vendor or the system manufacturer.
Access Mode
Capacity
Cylinder
Head
Precomp
LandingZone
Sector
Drive A
This item allows you to set the type of floppy drives installed. Available options: None, 360K, 5.25 in., 1.2M, 5.25 in., 720K, 3.5 in., 1.44M, 3.5 in., 2. 88M, 3.5 in.
HaltOn
The setting determines whether the system will stop if an error is detected at boot. Available options are:
All Errors
Disabled
All, But Keyboard
All, But Diskette
All, But Disk/Key
Base/Extended/TotalMemory
The three items show the memory status of your system (read only).
