Jumpers
The mainboard provides the following jumpers for you to set the computer’s function. This section will explain how to change your mainboard’s function through the use of jumpers.
Clear CMOS Jumper: JBAT1
There is a CMOS RAM on board that has a power supply from external battery to keep the data of system configuration. With the CMOS RAM, the system can automatically boot OS every time it is turned on. If you want to clear the system configuration, use the JBAT1 (Clear CMOS Jumper ) to clear data. Follow the instructions below to clear the data:
1 | 1 | 1 | |
JBAT1 | 3 | 3 | |
Keep Data | Clear Data | ||
|
MSIRemindsYou...
You can clear CMOS by shorting
