Connecting the 910 Digital Audio Preamplifier
Figure 6: Device Properties Screen
4.If required, make changes and press Set. If not, click Close.
6.3Connecting via USB
To connect the 910 via the USB port, you must plug the USB cable into the PC and install the Kramer USB driver downloaded from our Web site at http://www.kramerelectronics.com.
6.4Connecting a Microphone to the XLR Input
Connect a microphone to the XLR input as illustrated in Figure 7.
Figure 7: Connecting a Microphone to the XLR Input
Note: The XLR connector provides 15V phantom power when the MIC switch is set for a condenser microphone.
14 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |