Contents
Contents
1 | Introduction | 1 |
2 | Getting Started | 1 |
2.1 | Achieving the Best Performance | 2 |
2.2 | Safety Instructions | 2 |
2.3 | Recycling Kramer Products | 2 |
2.4 | Quick Start | 3 |
3 | Overview | 4 |
4 | Your 910 Digital Audio Preamplifier | 4 |
5 | Installing the 910 in a Rack | 8 |
6 | Connecting the 910 Digital Audio Preamplifier | 9 |
6.1 | Connecting the | 10 |
6.2 | Connecting the ETHERNET Port | 10 |
6.2.1 | Connecting the ETHERNET Port Directly to a PC (Crossover Cable) | 11 |
6.2.2Connecting the ETHERNET Port via a Network Hub (Straight Through Cable) 12
6.2.3 | Configuring the Ethernet Port | 12 |
6.3 | Connecting via USB | 14 |
6.4 | Connecting a Microphone to the XLR Input | 14 |
7 | Operating the 910 Digital Audio Preamplifier | 15 |
7.1 | Using the Front Panel Buttons | 15 |
7.1.1Using MIX 15
7.1.2 | Using Loudness | 15 |
7.1.3 | Using Talkover | 15 |
7.1.4Using Store 15
7.1.5Using Recall 15
7.2 | Controlling the 910 from the PC | 17 |
7.3 | Using the Infrared Remote Controller | 17 |
7.4 | Updating the 910 Firmware | 17 |
8 | Technical Specifications | 18 |
9 | Protocol 3000 Syntax | 19 |
9.1 | Host Message Format | 19 |
9.1.1 | Simple Command | 19 |
9.1.2 | Command String | 19 |
9.2 | Device Message Format | 19 |
9.2.1 | Device Long Response | 19 |
10 | 910 Commands in Protocol 3000 | 20 |
10.1 | Help Commands | 20 |
10.2 | Device Initiated Messages | 20 |
10.3 | Result and Error Codes | 20 |
i