|
|
| Your 910 Digital Audio Preamplifier | |||
|
|
| Table 1: 910 Digital Audio Preamplifier Functions | |||
|
|
|
|
| ||
| # | Feature | Function |
| ||
| 1 | IR Receiver | The red LED illuminates when receiving signals from the infrared |
| ||
|
|
|
| remote control transmitter |
| |
| 2 | MUTE Button | Press to toggle between turning off (muting) and turning on the |
| ||
|
|
|
| audio output |
| |
| 3 | INPUT Selector Buttons | Press a button to select an input (1 to 4) |
| ||
| 4 | MID Button | Press to adjust midrange frequencies on the selected input |
| ||
| 5 | BASS Button | Press to adjust low frequencies on the selected input |
| ||
| 6 | TREBLE Button | Press to adjust high frequencies on the selected input |
| ||
| 7 | LOUDNESS Button | Press to toggle loudness on the selected input |
| ||
| 8 | EQUALIZER Button | Press to adjust 7 different frequency bands on the selected input; |
| ||
|
|
|
| each press advances to the next band |
| |
| 9 | VOLUME Button | Press to adjust the output volume; to adjust the input volume |
| ||
|
|
|
| press VOLUME and STORE together |
| |
| 10 | BALANCE Button | Press to change the relative volume between the left and right |
| ||
|
|
|
| channels on the selected input |
| |
| 11 | DELAY Button | Press to adjust the delay in milliseconds on the output |
| ||
| 12 | MIX Button | Press to choose multiple inputs |
| ||
| 13 | TALKOVER Button | Press to allow the microphone to interrupt the selected input, the |
| ||
|
|
|
| background audio fades out when the microphone is loud enough |
| |
|
|
|
| and fades in when the microphone is silent again |
| |
| 14 | EXPAND Button | Press to increase the dynamic range of the output |
| ||
| 15 | COMPRESS Button | Press to decrease the dynamic range of the output |
| ||
| 16 | STORE Button | Press to save the device settings; use the adjustment knob or the |
| ||
|
|
|
| input buttons to select the preset number |
| |
| 17 | RECALL Button | Press to bring back a stored preset, use the adjustment knob or |
| ||
|
|
|
| the input buttons to select the preset number |
| |
| 18 | DISPLAY | 2 line, 24 character LCD display |
| ||
| 19 | Adjustment Knob | Turn to adjust the value of the selected function |
| ||
| 20 | INPUT 1 (LEFT, RIGHT) RCA | Connect to an unbalanced stereo audio source |
| ||
|
|
| Connectors |
|
|
|
| 21 | INPUT 2 Terminal Block | Connect to a balanced stereo audio source |
| ||
|
|
| Connector |
|
|
|
| 22 | INPUT 3 S/PDIF RCA | Connect to a digital audio source |
| ||
|
|
| Connector |
|
|
|
| 23 | INPUT 4 MIC XLR Connector | Connect to a microphone. The XLR connector provides 15V |
| ||
|
|
|
| phantom power when the MIC switch is set for a condenser |
| |
|
|
|
| microphone |
| |
| 24 | MIC MODE (DYN/COND.) | Press IN for dynamic mic, set OUT for condenser mic |
| ||
|
|
| Pushbutton |
|
|
|
| 25 | OUTPUT 1 (LEFT, RIGHT) | Connect to an unbalanced stereo audio acceptor (power |
| ||
|
|
| RCA Connectors | amplifier) |
| |
| 26 | OUTPUT 2 Terminal Block | Connect to an balanced stereo audio acceptor (power amplifier) |
| ||
|
|
| Connector |
|
|
|
| 27 | OUTPUT 3 S/PDIF RCA | Connect to a digital audio acceptor (digital power amplifier) |
| ||
|
|
| Connector |
|
|
|
| 28 | PROGRAM Switch | Slide down to upgrade the device firmware (see section 7.4); slide |
| ||
|
|
|
| up for normal operation |
| |
|
|
|
|
|
|
|
6 |
| KRAMER: SIMPLE CREATIVE TECHNOLOGY |