Operating the 910 Digital Audio Preamplifier
7.2Controlling the 910 from the PC
To operate your device remotely from your PC over the
Figure 8: 910 Control Application Screen
For an explanation of all control commands, see Section 10.
7.3Using the Infrared Remote Controller
To operate your device using the
7.4Updating the 910 Firmware
The 910 functions by means of a device microcontroller that runs firmware located in FLASH memory.
You can download1 and upgrade the latest version of firmware2 according to the recommendation of Kramer Technical Support.
1 Available on our Web site at http://www.kramerelectronics.com
2 The firmware is installed using the P3K software available from the Kramer Web site http://www.kramerelectronics.com
17