Kramer Electronics 10 910 Commands in Protocol, Help Commands, Device Initiated Messages

910 Commands in Protocol 3000

10910 Commands in Protocol 3000

This RS-232/RS-485 communication protocol lets you control the machine from any standard terminal software (for example, Windows® HyperTerminal Application) and uses a data rate of 115200 baud, with no parity, 8 data bits, and 1 stop bit.

This section describes all commands sent to the 910. For an explanation of the syntax and use of Protocol 3000, see Section 10.

10.1	Help Commands
Command		Syntax	Response
Protocol handshaking		#CR
			~OKCRLF
10.2	Device Initiated Messages
Command			Syntax
Start message			Kramer Electronics LTD. ,					Version
						Device Model
			Software Version
Switcher actions:
Audio channel has switched (breakaway mode)			AUD	IN>OUT
10.3 Result and Error Codes
			Syntax
Command ran successfully, no error.			COMMAND		PARAMETERS		OK
Protocol Errors:
Syntax error			ERR001
Command not available for this device			ERR002
Parameter is out of range			ERR003
Unauthorized access (command run without the			ERR004
matching login).

20 KRAMER: SIMPLE CREATIVE TECHNOLOGY