Peripheral Electronics Aux2Car instruction manual Car radio

TROUBLE SHOOTING

Symptom	Cause
No Power	Blown fuse
No Power	Bad connection
Alternator noise is heard	Wrong wiring creates
(Changes with gas)	ground loop.
Radio can’t recognize	Bad cables or cables are
Aux2car adaptor	not connected properly
	between converter box and
	car radio
Aux2car adaptor suddenly is	Bad connection or loss of
not recognized any more	power to interface
Radio can’t recognize	Wrong selection on dip
Aux2car adaptor	switch in the converter box

CHAPTER3

Remedy

Replace fuse with same amp. Rating. If the fuse blows again, call tech support.

Check cable connection.

Call tech support or ask a local car audio shop.

Check connection and cables, push in fi rmly.

Unplug the black converter box from Radio and plug again

Select the right protocol for you car. (See Page 3)

For technical support call 800-477-2267 9:30 am-6pm EST. MON - FRI

15