Settings for Toyota, PXHTY1 | Peripheral Electronics Aux2Car

VEHICLE INSTALLATION

Toyota / Scion / Isuzu / Honda-Passport

Before connecting any cables to the Aux2Car you must set the dip switches to the correct position. If you set the dip-switches after you have connected cables to the interface, you must disconnect and reconnect them for the Aux2Car to operate.

DIP SWITCHES MUST BE SET BEFORE YOU PLUG IN THE Aux2Car !!!

SETTINGS FOR

TOYOTA

1	2	3	4	5	6	7	8
on	on	off	on	off	off	off	on

Toyota 1998 – 2005 – Connects behind the radio with

PXHTY1

2003 and newer :4Runner; Sequoia; Rav4; Prius; Sienna; Tundra; Tacoma; Highlander Must use Toyota cable adapter, part # 08695-00370

Isuzu 1998-2003 – Connects behind the radio with

PXHTY1

Scion 2003-2005 – Connects behind the radio ( Must use Toyota cable adapter, part #08695-00370)

Toyota Matrix uses the PXHGM3 cable with GM class 2 settings. Please see GM section.

Cars that need cable part #08695-00370, can only be purchased from Toyota dealerships.

Call your nearest Toyota dealership, and ask for the parts dept.

OPERATION

Switch to the Aux2Car adaptor by pressing the “CD” button.