Grundig STR 400 AP manual Specification

Page 30

Specification

Reception range:

Satellite signals of 10700 ... 13000 MHz, according to used LNC, (Ku-band)

 

C- and S-band frequencies: 2500 ... 4000 MHz

 

IF input of tuner: 910 ... 2050 MHz,

 

two signal inputs (A, B)

Tuning system:

Frequency synthesizer with direct frequency entry.

 

Forward in 10 MHz steps.

 

Reverse in 3 MHz steps.

 

Single steps of 0.5 MHz; corresponds to finetuning.

Frequency search:

ATS (Automatic Tuning System) for horizontal and vertical polarisation.

Programmes:

199 TV programmes, 199 radio programmes.

Last station memory:

For TV and radio

Sound IF:

Direct frequency entry of 5.00 … 9.99 MHz, in 10 kHz steps.

Audio deemphasis:

With main carrier, Mono, MONO < >, selection possible between J 17 and 50 µsec.

Video deemphasis:

FBAS

 

Baseband: non-clamped PAL-deemphasis 10 MHz

 

Baseband: non-clamped non-deemphasis 10 MHz

Stereo:

PANDA-Wegener-Licence

Remote control:

TP 720 SAT universal remote control handset.

Display:

VF display: 21/2-position 7-segment display, 8-position dot matrix, labels.

Timer:

4-position Timer for switching on/off TV or radio programmes.

Modulator:

Frequency synthesizer: UHF CH 25 … CH 60, CH 36 factory-preset.

LNC feed-in:

14/18 V, max. 800 mA, LNC voltage with superimposed 22 kHz switching signal selectable.

 

If necessary, the LNC voltage can be switched off with switch wI.

Connections:

10-pole connector strip for controlling the external unit.

 

3 EURO-AV sockets (TV, decoder, and video recorder) with full-automatic

 

socket switching.

 

3 Cinch (phono) sockets (AF-Audio L and R, and remote control)

 

2 IEC coax sockets 75 Ω (terr. aerial input/output)

 

2 IEC coax sockets 75 Ω (SAT aerial input/output "A" and "B")

 

1socket 15 V/0.8 A =

Temperature range:

Ambient temperature 0 ˚C … + 40 ˚C, according to VDE 0860

Mains voltage:

220 … 240 V~, 50/60 Hz

 

(control range of mains unit 190 … 264 V)

Power consumption:

25 W during operation (without motor run); 13 W in standby

Cabinet:

(WxHxD) approx. 360x84x 285 mm3

Weight:

approx. 2.1 kg

German Federal Post Office

 

certification:

BZT KU 00705

This device is interference suppressed in accordance with applicable european standards. It complies with safety directive VDE 0860 and thus with the international safety regulation IEC 65.

This device must only be operated with the cable supplied. This prevents disturbances from the mains and is an integral component of the device. If a replacement is required, order only the mains cable set with the designation GWN 9.22 / Number 8290.991-316, from a custo- mer service agency.

Subject to change without notice

￿30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Page Contents Specification Installation and Safety PrecautionsCalling Up the Menu Timer Programming Protect Your EnvironmentConnection Examples BA InputEURO-AV sockets for 1 VCR, 1 decoder, and TV Left to right. For example, enter 1, 2, Buttons on the Remote Control HandsetButtons PositionSwitches between SAT-TV and SAT-radio mode Button For setting the brightness of the TV setButton For setting the colour contrast of the TV set Without function Teletext function on certain TV setsButtons and Connections on the Receiver Front of Unit¢ P/F ¢ V/H Pin Designation LNC-Power 14/18Rear of Unit +5 V/0.2 aImportant Information I99 Inputxax StereoBasic Adjustment of the Polarmount Aerial Mech. action radius of aerial MotorI99 XLIMITX1 Stereo Setting limitsI99 XL1XX414 Stereo I99 Westxend StereoPolarization switching Frequency switching withOr with 0/22 kHz, e.g., future Astra solution Frequency Polarization LNC power PreprogrammedSTR 400 AP installation mode LNC frequency entry I99 SKEWXX23 Stereo I99 SKEWXX72 StereoI99 Skewxall Stereo Adapting the PolarizerI99 XMANX132 Stereo I99 EASTX19 StereoButtons and their Functions on the Receiver Generally appliesSatellite transmission frequency 3900 MHz = Result if ¢ Audio Mono/Stereo and Sound Carrier Switching ¢ Video Adjusting the Video Deviation¢ / Down/Up Setting Buttons I99 H1X18VX- StereoI99 XMANX290 Stereo I99 XLEVXX74 StereoExample ¢ Radio Selecting Radio Mode Overview diagram of the aerial adjustment submenuPress the ¢P/F button to return to programme position Mode Menu OverviewCopy for radio programmes Volt External Switching VoltageSkew Polarizer Adjustment Volt or 12 Volt is indicated on the displayVID & AUD Decoder Selection Skew ALL Transferring the Skew ValueWIDE/NARROW if Bandwidth Norm Norm 1, 2 orI99 CODE2537 Stereo I99 CODE---- StereoDatalink Data Transmission I99 Codexclr StereoRemote Control Functions For this, it is necessary to press the ¢TV 8 or Video ßZ Universal Remote Control Handset30 00 Button in addition to the desired function buttonTimer Menu Timer operation Remote control via a video recorderSpecification Video output Video input Screen/earth SignalPin Assignment of the EURO-AV Sockets Additional Information for Units sold in Great Britain3 4 5 6 7 8
Top Page Image Contents