Grundig STR 400 AP manual Important Information, I99 Inputxax Stereo

Page 10

Important Information

General

Selecting the Aerial Input

For the description of the unit´s functions, it is assumed that the aerial has correctly been installed and that the receiver has correctly been connected.

Button Lock

Attention!

Except of the ¢</ > and ¢Radio buttons, all buttons are locked to prevent inadvertent operation.

To clear the lock, press one of the locked buttons for more than 3 seconds.

When switching the receiver off by means of the POWER

¢I ￿ switch, or with the remote control handset to standby, the lock is activated again.

Connecting the SAT Receiver to the Television

Best picture quality is obtained when the receiver and the television are connected by means of a EURO-AV cable (see connection example). If you possess a television without EURO-AV socket, make the connection via the built-in modu- lator with a coaxial cable. The modulator is preset to channel 36.

If this channel should already be occupied by your video recorder or a terrestrial station, it is possible to change the channel (see paragraphe "Modulat. – Adjusting the Modulator Channel"). You have the choice between channel 25 and channel 60. The televison must also be tuned to this channel.

16:9 Switching

If a switching voltage (6 V) for the 16:9 picture format is pre- sent on the EURO-AV DECODER or VCR socket, this will be evaluated and passed to the EURO-AV TV socket. Correspon- dingly equipped TV sets then are automatically switched to the 16:9 format.

The receiver is provided with two aerial inputs. Preprogram- ming in the factory has been made for the standard solution, comprising one LNC with frequency switching by means of a 14/18 V supply voltage, and polarization switching by means of a magnetic or mechanic polarizer.

If you wish to implement different solutions, such as, for example, two-cable distribution in the first IF level (separate H/V), several aerials, or multi-feed mode, it is necessary to activate the second aerial input with respect to the program- me position.

Press the ¢V/H button twice, then use the ¢</ > buttons to select input A qZ or B qU. The display indicates, for exam- ple:

TIMER o p ü +

I99 INPUTXAX STEREO

SIGNAL IIIIIIIIIIIII

Store the setting with the ¢MEMORY button.

The display indicates again the current programme position.

See also section "Adapting the Polarizer, Installation Menu".

If there should be interferences visible in the form of spikes (short black or white lines), these can be eliminated by opti- mizing the input frequency setting. For this, press the ¢P/F button and adjust the value giving the best picture on the TV screen by means of the ¢</ > buttons.

Store the corrected value in memory by pressing the

¢MEMORY button.

Hint

The receiver is already preprogrammed to all current pro- grammes from a number of satellites.

See the yellow pages: "Station Table of the Satellite Stations".

If you wish a different programme order, it is very easy to change the existing order.

For detailed information, see the corresponding explanation (SORT function in the chapter "The Mode Menu").

￿10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Contents Specification Installation and Safety PrecautionsCalling Up the Menu Timer Programming Protect Your EnvironmentConnection Examples BA InputEURO-AV sockets for 1 VCR, 1 decoder, and TV Left to right. For example, enter 1, 2, Buttons on the Remote Control HandsetButtons PositionSwitches between SAT-TV and SAT-radio mode Button For setting the brightness of the TV setButton For setting the colour contrast of the TV set Without function Teletext function on certain TV setsFront of Unit Buttons and Connections on the Receiver¢ P/F ¢ V/H Pin Designation LNC-Power 14/18Rear of Unit +5 V/0.2 aImportant Information I99 Inputxax StereoBasic Adjustment of the Polarmount Aerial Mech. action radius of aerial MotorI99 XLIMITX1 Stereo Setting limitsI99 XL1XX414 Stereo I99 Westxend StereoPolarization switching Frequency switching withOr with 0/22 kHz, e.g., future Astra solution Frequency Polarization LNC power PreprogrammedSTR 400 AP installation mode LNC frequency entry I99 SKEWXX23 Stereo I99 SKEWXX72 StereoI99 Skewxall Stereo Adapting the PolarizerI99 XMANX132 Stereo I99 EASTX19 StereoGenerally applies Buttons and their Functions on the ReceiverSatellite transmission frequency 3900 MHz = Result if ¢ Audio Mono/Stereo and Sound Carrier Switching ¢ Video Adjusting the Video Deviation¢ / Down/Up Setting Buttons I99 H1X18VX- StereoI99 XLEVXX74 Stereo I99 XMANX290 StereoExample Overview diagram of the aerial adjustment submenu ¢ Radio Selecting Radio ModePress the ¢P/F button to return to programme position Mode Menu OverviewCopy for radio programmes Volt External Switching VoltageSkew Polarizer Adjustment Volt or 12 Volt is indicated on the displayVID & AUD Decoder Selection Skew ALL Transferring the Skew ValueWIDE/NARROW if Bandwidth Norm Norm 1, 2 orI99 CODE2537 Stereo I99 CODE---- StereoDatalink Data Transmission I99 Codexclr StereoRemote Control Functions For this, it is necessary to press the ¢TV 8 or Video ßZ Universal Remote Control Handset30 00 Button in addition to the desired function buttonTimer Menu Timer operation Remote control via a video recorderSpecification Video output Video input Screen/earth SignalPin Assignment of the EURO-AV Sockets Additional Information for Units sold in Great Britain3 4 5 6 7 8
Top Page Image Contents