What to do
When an alarm is triggered, the pump goes into Attention mode and an alarm message shows on the screen. The pump then defaults to the HOME screen. Do these steps when you get an alarm:
1View the alarm. From the HOME screen, press any button to see the
alarm message.
2Read all of the alarm text. There are instructions on how to fix the alarm condition. (Press
to read more text, if available.)
3Clear the alarm. Press ESC then ACT after you read the alarm instructions.
(any button)
ALARM
MESSAGE
/ 
Alarm description and instructions show here.
ESC, ACT
4The HOME screen appears.
5Follow the instructions that appeared with the alarm to fix the alarm condition.
6Check your settings (i.e., time/date, basal, etc.) to make sure they are correct.
