76 Chapter: 5

Normal bolus using Bolus Wizard feature

After the Bolus Wizard feature is turned on and programmed, this feature can calculate an estimate
of insulin you need for your correction bolus and/or your food bolus. You have the option of using the
estimate or changing it as necessary. Additionally, your pump can receive your blood glucose readings
from the Paradigm Link meter, if they are linked.
Use to deliver a normal bolus at any time except during another Normal bolus. A normal bolus
will temporarily interrupt a Square Wave or Dual Wave bolus that is delivering. After the normal bolus is
finished, the Square Wave or Dual Wave bolus delivery will resume.
NOTE - If you want to use the pump-to-meter link, make sure the meter option is on. See “Meter
option” on page 73 for instructions.
1If you want a c orrection b olus, check y our blood glu cose with you r BG meter and go to step 2. If you
want to bolus for food, go to step 2.
2Press on your pump, or go to the BOLUS MENU, select Use Bolus Wizard, and press ACT.
3The ENTER BG screen will appear.
If you are NOT using the Paradigm Link meter: If you are using the Paradigm Link meter:
Enter your BG value. Press ACT and continue
to step 4.
If you are not entering a
BG and want to bolus for
food, select the dashes in
the ENTER BG screen.
Press ACT and continue to
step 4.
NOTE - Selecting dashes in this screen will
make the Bolus Wizard feature calculate
the insulin needed for your food entry
without considering your blood glucose
level.
The meter reading will
flash on the pump screen.
Press ACT to accept this
amount. (You can change
this BG value, if
necessary.) Continue to step 4.
NOTE - You must program your bolus within 12
minutes of the pump receiving the reading from
the meter. If more than 12 minutes have
passed, the reading will no longer be available
from the screen and you must enter your blood
glucose manually.
- - -
ENTER BG
mg/dL*
* or mmol/L

XXX

* or mmol/L
ENTER BG
meter
mg/dL*