Using the Bolus Wizard feature 73

Review your Bolus Wizard feature settings
Check your Bolus Wizard feature settings in the REVIEW SETTINGS screen. If necessary, compare this
information with your information in the Bolus Wizard feature settings table.
Bolus > Wizard Setup > Review Settings
1In the REVIEW SETTINGS screen, scroll through the text
to view your Bolus Wizard settings.
2Exit the menus when you are done.
Meter option
You can set up your pump to automatically receive your
blood glucose readings from the Paradigm Link meter. This
meter may not be available in all countries. Check with
your local Medtronic MiniMed representative. Your pump is
set at the factory with the meter option turned off.
Programming your Paradigm Link meter ID, links your pump
to the meter. If you do not “link” the meter to your pump,
you will enter your blood glucose readings manually. Each
Paradigm Link meter has its own unique ID. You can link up
to three (3) meters to your pump.
When the pump is idle (at the HOME screen), it will beep or vibrate when it receives a blood glucose
reading from the Paradigm Link meter. The reading will appear on the pump screen.
NOTE - The use of RF (radio frequency) devices with the pump reduces pump battery life.
You have to turn on the meter option to add, delete or review the meter ID(s) programmed in your
pump. The meter ID is the serial number printed on the back of the Paradigm Link meter. See the User
Guide that came with your Paradigm Link meter for detailed information on how to use it.
ACT
WIZARD SETUP
Edit Settings
Review Settings
REVIEW SETTINGS
Wizard On
Carb Units: grams
Carb Ratios:
12:00A
6:00A 15
10
BG Units: mg/dL
Sensitivity:
12:00A 30
6:00A 35
BG Target:
12:00A 90-120
6:00A 100-140
Active Ins Time: 6
Blood glucose
(BG) Readings
Pump
Paradigm Link
meter