140 Chapter: 9

Off no power

The battery is dead. Replace battery immediately. Follow the directions
on the screen. Check to make sure that the time is correct on the screen.
Reset the time if necessary.

Reset

The Reset alarm triggers when pump settings are cleared because of one
of these reasons:
➠Pump settings were cleared (Clear Settings function) and settings have
not been reprogrammed.
➠A download attempt from the PC is incomplete. (The download function is applicable to the optional
software feature. See the software User Guide for more information.)

Weak Battery

The pump tests the voltage of each battery installed. If the battery
voltage is less than full strength, this alarm may occur. The pump will
operate normally, but the battery life will be shorter than expected. Always
make sure to install a NEW battery in the pump.
0% battery life
Delivery stopped
Replace battery now
NO POWER
04:42 OFF
Use 1 AAA
ESC, ACT to clear
8:35A RESET
Settings cleared
by user
Reprogram settings
ESC, ACT to clear
WEAKBATTERY
11:17A
Shorter battery
life expected
ESC, ACT to clear