
Follow this procedure to clear the memory from your V35:
1Disconnect all cables, including the AC adapter, from your V35.
2Unscrew the tip of the stylus. Use the tip to push the battery switch to the OFF (up) position.
3Wait for three (3) minutes then push the battery switch to the ON (down) position.
4The Notification indicator will flash red for approximately 30 seconds, and then your V35 will automatically turn on and display the Welcome Wizard screen.
NOTE: If the battery runs completely out of power and is not
Power Problems
Power does not turn on when using battery power
•The remaining battery power may be too low to run your V35. Connect the AC adapter to your V35 and to external AC power. Then, turn on your V35. (Charge the battery whenever possible to avoid running out of battery power.)
Battery runs out of power quickly
•You might be using your V35 in ways that drain power quickly. (See “Managing Power” in Chapter 3 for tips on saving power.)
ViewSonic Pocket PC V35 | 73 |