Panasonic KX-BP800 Precautions Power cord, Interactive, Cable, Electronic Pen Eraser

Precautions

Power cord	CBefore moving the unit, disconnect the power cord from the electrical power
and Interactive	socket and AC inlet, and disconnect the interactive cable from the interactive
	connector and a PC. Then coil them for transportation. Failure to do these cause
cable	the cord and cable to be damaged if they are stepped on or if they catch on
	something while the unit is being moved.
Replacing the CDispose of the used thermal transfer film in a trash receptacle for burnable trash.
Thermal	CA negative of the copied image will remain on the thermal transfer film.
transfer film	(To protect the security of your information, we recommend cutting up used
	thermal transfer film with scissors or shredder before disposing of it.)
Electronic Pen
and
Electronic
Eraser
	Transmitter
	CDo not cover the transmitter with your hand while using an interactive function as
	this may cause the position of the Electronic Pen or the Electronic Eraser not to
	be normally detected.
	NG	OK

CPress down firmly with the point of the Electronic Pen or the eraser cloth of the Electronic Eraser on the screen film until you hear a buzzing sound, and then move it slowly.

However, do not press down the point of the Electronic Pen too much strongly as this may make a dent in the screen back panel.

CDo not use two or more the Electronic Pens or the Electronic Eraser at the same time as this may cause the position of the Electronic Pen or the Electronic Eraser not to be normally detected.

CFor precise positioning, keep the Electronic Pen and Electronic Eraser perpendicularly to the screen during use.

CSince ultrasonic is used to detect the position of the Electronic Pen and Electronic Eraser when they are being used, you may hear a buzzing sound, but this is not harmful to the human body or peripheral hardware.

It will also not result in an electric shock.

10