Panasonic KX-BP800 operating instructions Wall-mounting Kit KX-B063, No. Part name

Page 81

Wall-mounting Kit (KX-B063)

Before attempting installation of this wall-mounting kit, we strongly recommend consulting with the building facility nor manager, engineer, or architect. The installer needs to know the type of construction used for the wall intended for this installation and the location of wall studs. Selection of hardware is critical for safe wall-mounting, and dependent upon the nature of wall construction, installation should not occur until this consultation takes place.

Procedure for KX-B063 Wall-mounting Kit Installation

.Tools required:

One (1) KX-B063 kit

A minimum of eight (8) pieces of appropriate wall-support hardware (molley, toggle, etc.)

NOTE :THIS HARDWARE MUST BE LOCALLY PROCURED, IT IS NOT INCLUDED IN THE KIT. Drill (and drill bit of correct size) for hardware installation

Screw driver (Both phillips (+) and slotted (-) will be required.) Tape measure

Tape or thumb-tacks (2pcs) Bubble type level

.Pre-requisites

1.Before installation, make sure that the wall intended for installation is capable of supporting flush-mounted.

[ KX-BP800 is 103 kgf (227 Ibs). ]

2.The position of the intended installation is of adequate size for the selected Panaboard. [ KX-BP800 is 1,575 mm X 1,524 mm (5'2"✕5').]

3.An outlet is within 3 m (9'104/32"), and it is not located directly behind the Panaboard.

■Accessories

The package includes the parts noted below ; please confirm that all parts are present before beginning installation.

Eight screws for mounting the fixtures on the wall are not provided. Please purchase the appropriate wall-mounting hardware (sold in stores). Refer to pages 83 and 84.

No. Part name			Order
	Part illustration, Q'ty of use
Wall-mounting	L	✕2	3
fixture L

	Wall-mounting	R	✕2	3
	fixture R	R


			✕2
	Wing bolt	M5✕12 mm (15/32")		—
		M5✕12 mm (15/32")
		No use*

These are used for other models.

No. Part name		Order
No. Part name	Part illustration, Q'ty of use
	✕4
Screw	M4✕16 mm	—
	M4✕16 mm
	No use*

	Wall-mounting	✕1	2
	template

No use*

Use the wall-mounting template provided with KX-BP800.

Installation

81

Image 81

Contents Panaboard Things you should keep a record Attach your sales receipt hereFederal Communications Commission Requirements Features CProjector mode Interactive functionCElectronic print board Features CWhiteboard mode Interactive functionCPC Interface Option Table of Contents CConsumable and accessories Table of ContentsInstallation CAbout NetMeetingLocking the casters Push this side PrecautionsScreen film InstallationMarkers ErasersInteractive Precautions Power cordCable Electronic Pen EraserProjector BatteryPart Names and Functions Part Names and Functions Control panel Panel Description Installing Thermal Transfer Film Insert the four gears into the new thermalTransfer film Install the film cassette Installing Thermal Transfer FilmLoad the thermal transfer film into the film cassette Close the printer doorLoading Copy Paper Set the power switch to onLoading Copy Paper Press the copy key Making CopiesMaking Copies Copy types and procedures Copy Type Procedure Replacing Thermal Transfer Film Push down the printer open lever to openPrinter door, and remove the film cassette with Remove the film cassette with both hands Paper JamsPaper Jams Turn the power off and onOpen the paper cover and remove all copy Paper remaining inside the units paper coverGuide Maximum Paper Limit Setting the Electronic Pen Before Using the Interactive FunctionRemove the battery cover on the pen holder Right, and re-attach the battery coverRemove the eraser cloth by pushing through Replacing the eraser clothHole in the Electronic Eraser Attach a new eraser cloth by pressing aroundConnecting to the PC Before Using the Interactive Function System requirementsCInstalling the Interactive Panaboard Software Click Interactive Panaboard from software menuRemark CInstalling Adobe Acrobat Reader Before Using the Interactive FunctionWhen the Whiteboard mode is selected Switching the mode Settings of the Interactive Panaboard SoftwareCcom port CAdjustment Using the Interactive Panaboard SoftwareReference the help Exiting the Interactive Panaboard SoftwarePrecautions when using a projector Projector ModeCCalibration Projector Mode Basic operation flow in Projector modeCUse the Electronic Pen as a mouse Projector ModeCDraw and erase handwritten lines on the Desktop Drag the Mouse to the area on the Desktop to be erasedCPlayback the recorded data by View window CRecord image and handwritten lines data on the DesktopAbout Desktop Drawing Tool CDraw and erase handwritten lines Desktop Drawing Tool operationClick Setting in the Desktop Drawing Tool CChange Marker/Eraser settingsCErase all handwritten lines on the Desktop Click All Clear in the Desktop Drawing ToolCPrint an image of the Desktop CSave Desktop in image fileCSet the background of the Desktop to the Whiteboard CRedisplay handwritten lines drawn on the DesktopCRecord drawing data in IPB document Click Minimum in the Desktop Drawing Tool CReduce display size of the Desktop Drawing ToolProjector Mode About View window Basic operation flow in Whiteboard mode Whiteboard ModeCSave drawing data in a file Whiteboard ModeClick Save As... in the File menu COpen the saved dataWhiteboard Mode About Whiteboard window Difference Details Menu configurationHtml Tool bars View Window or Whiteboard Window OperationCreate an IPB document Whiteboard window only Open an IPB documentClick New... in the File menu Save the IPB document in another file format Save the IPB documentClick Save in the File menu CSave the IPB document as an image fileClick Export · HTML... in the File menu CSave the IPB document as a Html fileView Window or Whiteboard Window Operation CDisplay page at the same size of the main view CDisplay expanded/reducedClick Fit Window in the View menu CDisplay page as large as possibleEdit a page of the IPB document CAdd a new page to the IPB document Whiteboard window only CUndoClick the OK button to delete CDelete currently displayedCSelect CCopy selected page range to clipboardClick Start in the Page/Play Toolbar Playback the IPB documentCSetting meeting information SettingsCConfirm print image of the IPB document before printing CPrint currently displayed IPB documentClick Play... in the Settings menu CSet the interval when playing back the IPB documentClick Markers and Eraser... in the Settings menu CSet the marker width, color or the eraser sizeClick Export Image... in the Settings menu CSet a work folder and the recovery file Click File... in the Settings menuFollowing items can be set Click Options... in the Settings menu COption settingWhiteboard mode Example of using NetMeetingConfer on the remote place using the shared program About NetMeetingRemote Conferencing using Microsoft NetMeeting Cleaning the screen and the unit Daily Care and MaintenanceCleaning the printer head, platen roller and feed roller Caring for the eraserClean the Printer Head Daily Care and MaintenanceClean the Platen Roller and the Feed Roller Attach the film cassette in its original positionTroubleshooting Symptom Care and RemedyReplacing the Cloth of the Electronic Eraser Care and Remedy Troubleshooting SymptomCause Remedy Troubleshooting Meanings of various displaysSpecifications Model Number KX-BP800General Input Block Output Block For Print Board Specifications Consumable and accessoriesInteractive ForInstallation Manual Assembling the Print Board AssemblyAttach the print board If you are using a stand If you are using a wall- mounting kitAssembling the Print Board Fit the power cord into the cord holder. Do not force it Attach the power cordWipe the screen film surface Check operationsPrint Board Operations Check Multiple copy Other points to check Error displayNormal print board operations check StepPrint Board Operations Check Interactive operations check RepackingCBefore assembly, be sure to lock the casters AccessoriesAssembling the Optional Stand KX-BP065 No. Part name Part illustration QtyAssembling the stand Assembling the Optional Stand KX-BP065 AssemblyAssembling the Optional Stand KX-BP065 No. Part name Wall-mounting Kit KX-B063Wall-mounting Kit KX-B063 Wall-mounting procedure Tape the wall-mounting template to the wallMount the print board. Please refer to Stud plugs sold in stores are needed BAttaching to metal or concrete wallsWall-mounting Kit KX-B063 BAttaching to plasterboard wallsBAttaching to wooden walls Memo These Operating Instructions are printed on recycled paper