Panasonic KX-BP800 operating instructions Federal Communications Commission Requirements

Page 3

Warning Notices

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

CAUTION:

TO PREVENT RISK OF ELECTRIC SHOCK HAZARD, DO NOT REMOVE THE COVER OF THIS PRODUCT, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE SOCKET-OUTLET MUST BE NEAR THIS EQUIPMENT AND MUST BE EASILY ACCESSIBLE.

Federal Communications Commission Requirements

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Warning: To assure continued FCC compliance, the user must use only the provided power supply cord. Also, any

unauthorized changes or modifications to this equipment would void the user’s warranty.

Accessories

CFilm cassette (Blue gear✕1, Green gears✕3)

.......

1

 

 

 

 

 

...................

1

CThermal transfer film [20m (65.6')]

 

 

CMarkers (Black, Red, Blue-Big)

..............

 

 

 

Each 1

CEraser

...............................................................

1

 

 

 

 

 

 

CLetter papers

.......................................

 

 

 

 

20 sheets

CPen holder

........................................................

2

 

 

 

 

 

CMarkers for interactive

 

 

 

 

(Black, Red, Blue, Green-Small)

.......

 

 

Each 1

CElectronic eraser

..............................................

1

 

 

 

 

 

 

 

CEraser cloth (for Electronic eraser)

...................

2

 

 

 

 

 

 

.....................................

6

CBatteries (LR03 “AAA”)

 

 

CPower cord

.......................................................

1

 

 

 

 

 

 

 

 

CInteractive cable (5m)

.......................................

1

 

 

 

 

 

CSoftware CD-ROM

...........................................

1

 

 

 

 

 

 

COperating Instructions

......................................

1

 

 

 

 

CSoftware License Agreement

...........................

1

 

 

CWall-mounting template

....................................

1

 

 

 

The markers (Big) and the eraser are used for other than the interactive function.

The markers for interactive (Small) are used while inserted in the pen holder.

In this manual, the pen holder with a marker for interactive (Small) is called the Electronic Pen. The Electronic Pen and the Electronic Eraser are used with the interactive function.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Panaboard Things you should keep a record Attach your sales receipt hereFederal Communications Commission Requirements Features CProjector mode Interactive functionCElectronic print board Features CWhiteboard mode Interactive functionCPC Interface Option Table of Contents CAbout NetMeeting Table of ContentsCConsumable and accessories InstallationLocking the casters Push this side PrecautionsErasers InstallationScreen film MarkersElectronic Pen Eraser Precautions Power cordInteractive CableProjector BatteryPart Names and Functions Part Names and Functions Control panel Panel Description Installing Thermal Transfer Film Insert the four gears into the new thermalTransfer film Close the printer door Installing Thermal Transfer FilmInstall the film cassette Load the thermal transfer film into the film cassetteLoading Copy Paper Set the power switch to onLoading Copy Paper Press the copy key Making CopiesMaking Copies Copy types and procedures Copy Type Procedure Replacing Thermal Transfer Film Push down the printer open lever to openPrinter door, and remove the film cassette with Remove the film cassette with both hands Paper JamsPaper remaining inside the units paper cover Turn the power off and onPaper Jams Open the paper cover and remove all copyGuide Maximum Paper Limit Right, and re-attach the battery cover Before Using the Interactive FunctionSetting the Electronic Pen Remove the battery cover on the pen holderAttach a new eraser cloth by pressing around Replacing the eraser clothRemove the eraser cloth by pushing through Hole in the Electronic EraserConnecting to the PC Before Using the Interactive Function System requirementsCInstalling the Interactive Panaboard Software Click Interactive Panaboard from software menuRemark CInstalling Adobe Acrobat Reader Before Using the Interactive FunctionWhen the Whiteboard mode is selected Switching the mode Settings of the Interactive Panaboard SoftwareCcom port Exiting the Interactive Panaboard Software Using the Interactive Panaboard SoftwareCAdjustment Reference the helpPrecautions when using a projector Projector ModeCCalibration Projector Mode Basic operation flow in Projector modeDrag the Mouse to the area on the Desktop to be erased Projector ModeCUse the Electronic Pen as a mouse CDraw and erase handwritten lines on the DesktopCPlayback the recorded data by View window CRecord image and handwritten lines data on the DesktopAbout Desktop Drawing Tool CDraw and erase handwritten lines Desktop Drawing Tool operationClick All Clear in the Desktop Drawing Tool CChange Marker/Eraser settingsClick Setting in the Desktop Drawing Tool CErase all handwritten lines on the DesktopCRedisplay handwritten lines drawn on the Desktop CSave Desktop in image fileCPrint an image of the Desktop CSet the background of the Desktop to the WhiteboardCRecord drawing data in IPB document Click Minimum in the Desktop Drawing Tool CReduce display size of the Desktop Drawing ToolProjector Mode About View window Basic operation flow in Whiteboard mode Whiteboard ModeCOpen the saved data Whiteboard ModeCSave drawing data in a file Click Save As... in the File menuWhiteboard Mode About Whiteboard window Difference Details Menu configurationHtml Tool bars View Window or Whiteboard Window OperationCreate an IPB document Whiteboard window only Open an IPB documentClick New... in the File menu CSave the IPB document as an image file Save the IPB documentSave the IPB document in another file format Click Save in the File menuClick Export · HTML... in the File menu CSave the IPB document as a Html fileView Window or Whiteboard Window Operation CDisplay page as large as possible CDisplay expanded/reducedCDisplay page at the same size of the main view Click Fit Window in the View menuEdit a page of the IPB document CAdd a new page to the IPB document Whiteboard window only CUndoCCopy selected page range to clipboard CDelete currently displayedClick the OK button to delete CSelectClick Start in the Page/Play Toolbar Playback the IPB documentCPrint currently displayed IPB document SettingsCSetting meeting information CConfirm print image of the IPB document before printingCSet the marker width, color or the eraser size CSet the interval when playing back the IPB documentClick Play... in the Settings menu Click Markers and Eraser... in the Settings menuClick Export Image... in the Settings menu CSet a work folder and the recovery file Click File... in the Settings menuFollowing items can be set Click Options... in the Settings menu COption settingAbout NetMeeting Example of using NetMeetingWhiteboard mode Confer on the remote place using the shared programRemote Conferencing using Microsoft NetMeeting Caring for the eraser Daily Care and MaintenanceCleaning the screen and the unit Cleaning the printer head, platen roller and feed rollerAttach the film cassette in its original position Daily Care and MaintenanceClean the Printer Head Clean the Platen Roller and the Feed RollerTroubleshooting Symptom Care and RemedyReplacing the Cloth of the Electronic Eraser Care and Remedy Troubleshooting SymptomCause Remedy Troubleshooting Meanings of various displaysSpecifications Model Number KX-BP800General Input Block Output Block For Specifications Consumable and accessoriesFor Print Board InteractiveInstallation Manual Assembling the Print Board AssemblyAttach the print board If you are using a stand If you are using a wall- mounting kitAssembling the Print Board Check operations Attach the power cordFit the power cord into the cord holder. Do not force it Wipe the screen film surfaceStep Multiple copy Other points to check Error displayPrint Board Operations Check Normal print board operations checkPrint Board Operations Check Interactive operations check RepackingNo. Part name Part illustration Qty AccessoriesCBefore assembly, be sure to lock the casters Assembling the Optional Stand KX-BP065Assembling the stand Assembling the Optional Stand KX-BP065 AssemblyAssembling the Optional Stand KX-BP065 No. Part name Wall-mounting Kit KX-B063Wall-mounting Kit KX-B063 Wall-mounting procedure Tape the wall-mounting template to the wallMount the print board. Please refer to Stud plugs sold in stores are needed BAttaching to metal or concrete wallsWall-mounting Kit KX-B063 BAttaching to plasterboard wallsBAttaching to wooden walls Memo These Operating Instructions are printed on recycled paper
Top Page Image Contents