Panasonic KX-BP800 Daily Care and Maintenance, Clean the Printer Head, Close the printer door

Page 66

Daily Care and Maintenance

	Clean the Printer Head
2	Dampen the tip of a cotton swab in ethyl
	alcohol and gently wipe the printer head.

Note

CNever touch the printer head or the surrounding area with your hands as this may disable copying.

Cotton Swab

Printer Head

(Gold)

	Clean the Platen Roller and the Feed Roller
3	Remove the film cassette with both hands and
3	carefully wipe any dirt or stains off the platen

roller and feed roller.

CFor details on removing the film cassette, see page 20.

CDampen a soft cloth with neutral kitchen cleaner diluted in water, wring the cloth thoroughly, and wipe the entire surface of the rollers while rotating them. If this does not remove all dirt, wipe with a cloth dampened with ethyl alcohol.

4	Attach the film cassette in its original position
4	and close the printer door.
	CFor details on attaching the film cassette, see
	page 14.
	CClose the printer door firmly until a click is
	heard.

Note

CIf " " is displayed on the multi-copy/error indicator when the power is turned on, this indicates that the film cassette has not been installed properly or that there is slack in the thermal transfer film. Check the condition of the film cassette and for slack in the thermal transfer film.

Feed Roller

Platen

Roller

Printer Door

Printer Door

66

Image 66

Contents Panaboard Attach your sales receipt here Things you should keep a recordFederal Communications Commission Requirements Features CProjector mode Interactive functionCElectronic print board Features CWhiteboard mode Interactive functionCPC Interface Option Table of Contents Installation Table of ContentsCConsumable and accessories CAbout NetMeetingPrecautions Locking the casters Push this sideMarkers InstallationScreen film ErasersCable Precautions Power cordInteractive Electronic Pen EraserBattery ProjectorPart Names and Functions Part Names and Functions Control panel Panel Description Installing Thermal Transfer Film Insert the four gears into the new thermalTransfer film Load the thermal transfer film into the film cassette Installing Thermal Transfer FilmInstall the film cassette Close the printer doorSet the power switch to on Loading Copy PaperLoading Copy Paper Making Copies Press the copy keyMaking Copies Copy types and procedures Copy Type Procedure Replacing Thermal Transfer Film Push down the printer open lever to openPrinter door, and remove the film cassette with Paper Jams Remove the film cassette with both handsOpen the paper cover and remove all copy Turn the power off and onPaper Jams Paper remaining inside the units paper coverGuide Maximum Paper Limit Remove the battery cover on the pen holder Before Using the Interactive FunctionSetting the Electronic Pen Right, and re-attach the battery coverHole in the Electronic Eraser Replacing the eraser clothRemove the eraser cloth by pushing through Attach a new eraser cloth by pressing aroundBefore Using the Interactive Function System requirements Connecting to the PCCInstalling the Interactive Panaboard Software Click Interactive Panaboard from software menuRemark Before Using the Interactive Function CInstalling Adobe Acrobat ReaderWhen the Whiteboard mode is selected Switching the mode Settings of the Interactive Panaboard SoftwareCcom port Reference the help Using the Interactive Panaboard SoftwareCAdjustment Exiting the Interactive Panaboard SoftwareProjector Mode Precautions when using a projectorProjector Mode Basic operation flow in Projector mode CCalibrationCDraw and erase handwritten lines on the Desktop Projector ModeCUse the Electronic Pen as a mouse Drag the Mouse to the area on the Desktop to be erasedCRecord image and handwritten lines data on the Desktop CPlayback the recorded data by View windowAbout Desktop Drawing Tool Desktop Drawing Tool operation CDraw and erase handwritten linesCErase all handwritten lines on the Desktop CChange Marker/Eraser settingsClick Setting in the Desktop Drawing Tool Click All Clear in the Desktop Drawing ToolCSet the background of the Desktop to the Whiteboard CSave Desktop in image fileCPrint an image of the Desktop CRedisplay handwritten lines drawn on the DesktopCRecord drawing data in IPB document CReduce display size of the Desktop Drawing Tool Click Minimum in the Desktop Drawing ToolProjector Mode About View window Whiteboard Mode Basic operation flow in Whiteboard modeClick Save As... in the File menu Whiteboard ModeCSave drawing data in a file COpen the saved dataWhiteboard Mode About Whiteboard window Menu configuration Difference DetailsHtml View Window or Whiteboard Window Operation Tool barsCreate an IPB document Whiteboard window only Open an IPB documentClick New... in the File menu Click Save in the File menu Save the IPB documentSave the IPB document in another file format CSave the IPB document as an image fileCSave the IPB document as a Html file Click Export · HTML... in the File menuView Window or Whiteboard Window Operation Click Fit Window in the View menu CDisplay expanded/reducedCDisplay page at the same size of the main view CDisplay page as large as possibleEdit a page of the IPB document CUndo CAdd a new page to the IPB document Whiteboard window onlyCSelect CDelete currently displayedClick the OK button to delete CCopy selected page range to clipboardPlayback the IPB document Click Start in the Page/Play ToolbarCConfirm print image of the IPB document before printing SettingsCSetting meeting information CPrint currently displayed IPB documentClick Markers and Eraser... in the Settings menu CSet the interval when playing back the IPB documentClick Play... in the Settings menu CSet the marker width, color or the eraser sizeClick Export Image... in the Settings menu CSet a work folder and the recovery file Click File... in the Settings menuFollowing items can be set COption setting Click Options... in the Settings menuConfer on the remote place using the shared program Example of using NetMeetingWhiteboard mode About NetMeetingRemote Conferencing using Microsoft NetMeeting Cleaning the printer head, platen roller and feed roller Daily Care and MaintenanceCleaning the screen and the unit Caring for the eraserClean the Platen Roller and the Feed Roller Daily Care and MaintenanceClean the Printer Head Attach the film cassette in its original positionTroubleshooting Symptom Care and RemedyReplacing the Cloth of the Electronic Eraser Troubleshooting Symptom Care and RemedyTroubleshooting Meanings of various displays Cause RemedySpecifications Model Number KX-BP800General Input Block Output Block Interactive Specifications Consumable and accessoriesFor Print Board ForInstallation Manual Assembly Assembling the Print BoardAttach the print board If you are using a stand If you are using a wall- mounting kitAssembling the Print Board Wipe the screen film surface Attach the power cordFit the power cord into the cord holder. Do not force it Check operationsNormal print board operations check Multiple copy Other points to check Error displayPrint Board Operations Check StepRepacking Print Board Operations Check Interactive operations checkAssembling the Optional Stand KX-BP065 AccessoriesCBefore assembly, be sure to lock the casters No. Part name Part illustration QtyAssembling the Optional Stand KX-BP065 Assembly Assembling the standAssembling the Optional Stand KX-BP065 Wall-mounting Kit KX-B063 No. Part nameWall-mounting Kit KX-B063 Wall-mounting procedure Tape the wall-mounting template to the wallMount the print board. Please refer to BAttaching to metal or concrete walls Stud plugs sold in stores are neededWall-mounting Kit KX-B063 BAttaching to plasterboard wallsBAttaching to wooden walls Memo These Operating Instructions are printed on recycled paper