OPERATING FEATURES
. Alphanumeric display
The
After the dealer'squalfied service technician programs the transceiver, the alphanumeric display shows system numbers and group numbers for your s~ecificnetwork.
TA indicator
Appears when the
3-2. System Lockout
The system lockout feature IS used to lock systems out of the scan sequence, and can be selected b y pro- gramming in the following t w o ways:
Fixed lockout
The system to be locked out is selected by program- ming. When a locked system is selected, the Delete ( ) ) Indicator appears on the left of the SYSTEM indi- cator. The revert system is scanned even if it is locked out. If there is a locked system, the Delete ( b ) indica- tor flashes during fixed scanning. (It does not light continuously or flash during list type scan.)
User selectable lockout
)
I
r'
bc
;
b
OPT indictor
Dlsplays t h e
AUX (Auxiliary) indicator
Appears when t h e manual relay or horn alert function IS activated (ON) by presslng the AUX key
Handset indicator
Appears when a group I S selected that IS programmed wlth telephone IDS (It flashes durlng
AUTO TEL 1
3. Details of Features
3-1. System Scan
System scan can be selected wlth the "SCAN" key y programmlng the scan feature When the "SCAIU'
key IS pressed and the amark appears, scan mode IS entered Scann~ngstarts from the system follow~ng the currently dlsplayed system When scannlng,
When the system or group or volume (AUX) key IS pressed dur~ngscannlng, the scan stops and the revert system or group can be changed Scannlng resumes one second after the key IS released If the scan feature is not programmed, the "SCAN" key on the front panel is ineffective.
If the AUX (Auxiliary) key is programmed for the scan lockout feature, the user can lock systems out of the scan sequence with the AUX key. To lock a system out of the scan sequence, press the AUX key when the system is dlsplayed. The Delete ( b ) indicator is displayed on the left of the SYSTEM indicator.
To unlock a system, select the system and press the AUX key. The Delete ( ) ) indicator disappears t o indicate that the system has returned t o the scan se- quence. The revert system is scanned even if it is locked out. If there a locked system, the Delete ( b indicator flashes during fixed scanning. (It does not light continuously or flash during list type scan.) If all systems are locked out, the scan stops and only the revert system is received.
If another function is assigned to the AUX (Auxiliary) key, the USER SELECTABLE LOCKOUT feature does not function.
3-3. Drop-Out Delay Time (Scan Resume Time)
If a call IS received during scan, the scan stops The scan resume time can be programmed as 0 t o 254 sec- onds In
3-4. Dwell Time
The dwell time 1s the time after transmlsslon ends until the scan resumes In scan mode It can be set to 0 to 254 seconds by programmlng The default value 1s
15seconds.