Gemini CDM-3610 manual Introduction, Features, Safety Specifications, Precautions, Connections

INTRODUCTION:

Congratulations on purchasing the Gemini CDM-3610 Professional CD/MP3 DJ Work Station. This unit is backed by a (1) year warranty. Prior to use, we urge that you understand all instructions and features.

FEATURES:

Player Section-

-Audio CD, & CD-R, & MP3 compatible -Anti-shock using RAM buffer memory

-Large blue backlit LCD display with text for MP3

-3 Selectable Jog modes Scratch Effect/Cue Search/ Pitch Bend

-Instant-start & cue with preview -Instant reverse for added effect -Brake mode for vinyl-like stops -Fader-Start capability

-High-speed search using SEARCH buttons -Single & Continuous play modes

-One seamless loop per side with reloop

-Pitch bend via jog wheel or buttons +/- 16% -Three mode-time selection

-Frame accurate search

-Rubber jog wheels with finger grips

-Variable pitch control with three settings +/- 4, 8 & 16% - Fully programmable with repeat function

Mixer Section-

-3-band EQ w/ Gain Control -1/4” headphone output -XLR and 1/4” mic input

-Auxiliary Inputs for Phono or Line devices

SAFETY SPECIFICATIONS:

Laser Diode Properties

Material: Ga - Al - As

Wavelength: 755 - 815 nm (25° C)

Laser Output: Continuous Wave, max. 0.5 mW

PRECAUTIONS:

1.Do not use this CD player at temperatures below 41°F/5°C or higher than 95°F/35°C.

2.The apparatus should not be exposed to dripping or splashing, and no objects filled with liquids such as vas- es should be placed on the apparatus.

3.Place the unit in a clean and dry location.

4.Do not place the unit in an unstable location.

5.When disconnecting the power cord from the AC out- let, always grasp by the plug. Never pull the power cord.

6.To prevent electric shock, do not remove the cover or the bottom screws.

7.There are NO USER SERVICEABLE PARTS INSIDE.

Please refer to a qualified technician.

(IN THE USA ~ IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT CALL GEMINI CUSTOMER SERVICE AT: 1

4

CDM-3610

(732)346-0061. DO NOT ATTEMPT TO RETURN THIS EQUIPMENT TO YOUR DEALER.)

8.Do not use chemical solvents to clean the unit.

9.Keep the laser pickup clean by keeping the tray closed.

10.Keep this manual in a safe place for future reference.

CONNECTIONS:

1POWER: Plug in the power cord of the CDM-3610.

2CONVERTIBLE PHONO/LINE INPUTS: The CDM-3610 has 2 CONVERTIBLE PHONO/LINE RCA INPUTS when switched to the PHONO position (see below) you may use any Turntable with a magnetic cartridge, remember to connect your ground wire (see GROUNDING SCREW) or there may be a system hum. When the switch is in the LINE position you may connect any line level device as described before (MP3, CD, Tape etc). Now you may plug the RCA’s from your playable medium into each input to be connected to their respective CHANNELS.

NOTE: CONNECTING A LINE LEVEL DEVICE TO A PH IN- PUT MAY CAUSE THAT MIXER CHANNEL TO OVERLOAD AND OR DISTORT.

3CONVERTIBLE LINE SWITCHES: These small switches al- low you to choose between a PHONO (Turntable) input or a LINE level (MP3, CD, Tape player etc..).and require the proper switching.

4MASTER RCA OUTPUT (UNBALANCED): The MASTER

RCA output connects the mixer to your main amplifier us- ing standard audio cables with RCA-type connectors.

5RECORD RCA OUTPUT: RCA output jacks can be used to connect the mixer to the record input of your record- ing unit, thus enabling you to record your mix with RCA cables.

6MASTER XLR OUTPUT (BALANCED): Allows you to con- nect balanced XLR cables to MASTER OUTPUT of the CDM-3610 both the RCA and XLR outputs can be used at the same time but are both controlled via the same MAS-

TER OUTPUT.

7HEADPHONE OUTPUTS: The HEADPHONE OUTPUTS lo- cated at rear center and front center of the CDM-3610 will accept any headphone with a standard 1/4” connector and or adaptor and will allow you to CUE your music program before you play it. Volume adjustment and PGM mix of the HEADPHONE (see CONTROLS) below.

8MIC (MICROPHONE) INPUTS: The main MIC or Micro- phone inputs are located at the back right-hand corner and front panel of the CDM-3610 and will accept any bal- anced and unbalanced XLR as well a standard 1/4” con- nector. Gain control for the mic (See CONTROLS) below.