CDM-3610
causes the operation to change from PLAY to PAUSE or from PAUSE back to PLAY. The PLAY/PAUSE BUTTON remains lit when in PLAY mode, while it blinks in PAUSE mode.
24CUE: To set a CUE point, press the PLAY/PAUSE BUTTON while a file is playing and use the JOG WHEEL to locate a desired CUE point. Pressing the PLAY/PAUSE BUT- TON again will set a CUE point. While the unit is playing and after the cue point has been programmed, pressing CUE will cause the CD player to enter the PAUSE mode (PLAY/PAUSE BUTTON blinks) at the programmed cue point (the CUE LED is lit). Holding down the CUE but- ton changes the function to preview, and allows you to stutter start or play from the programmed CUE POINT. Releasing the CUE button will return the CD to the preset CUE point.
25TRACK SELECTION ROTARY: The TRACK SELECTION ROTARY allows you to select the next or previous track by either turning it clockwise to go forward or counter- clockwise to go back. Select the track desired by press- ing the TRACK SELECTION ROTARY.
NOTE: ONCE YOU HAVE SKIPPED TO ANOTHER TRACK, YOU MAY NOT GO BACK TO YOUR PROGRAMMED CUE POINT. YOU MUST BEGIN YOUR CUE SELECTION OVER AGAIN, THE CUE WILL BE PRESET TO THE BEGINNING OF THE NEWLY SELECTED TRACK.
26BRAKE: To engage the BRAKE function, press the BRAKE button, then press the PAUSE button to perform the brake effect. To restart the song, press the PAUSE button.
27REVERSE: When the REVERSE button is pressed, the file that is currently playing begins to play in reverse mode.
28SEARCH: The SEARCH feature allows the operator to go forward or backwards in time on the current track as- signed to that channel.
MIXER SECTION:
29 CHANNEL INPUT SELECTOR: The CHANNEL INPUT SELECTOR switches allow you to choose which input will be controlled by that channels corresponding vol- ume FADER. For example CHANNEL (1) INPUT SELEC- TOR allows you to choose between line (1) (That sides internal CD player), line (2) which is line input RCA (1) and or PHONO (1) (if the CONVERTIBLE LINE SWITCH is switched to PHONO) see above. The same applies for channel 2.
30CHANNEL ROTARY GAIN: The CHANNEL ROTARY GAIN allows you to boost the signal of each individual channel depending on how low or high its input level is.
31
32CHANNEL VOLUME FADER: After you have chosen which input you will use with the INPUT SELECTOR the corre- sponding CHANNEL FADER will allow you to adjust the volume for that particular CHANNEL.
33CHANNEL CUE SELECTOR: The CHANNEL CUE SELEC- TOR allows you to choose which channel you wish to monitor in your headphones, to the left is CHANNEL (1) to the right is CHANNEL (2).
34CUE VOLUME ROTARY KNOB: The CUE VOLUME RO- TARY KNOB adjusts your HEADPHONE MONITOR OUT- PUT’S volume.
35MICROPHONE VOLUME ROTARY KNOB: Allows you to adjust the volume of the microphone signal.
36MASTER OUTPUT ROTARY KNOB: The MASTER OUTPUT rotary knob adjusts the volume of the MAIN MASTER out- put.
37VU METER: The
38FADER START BUTTON: The Fader Start function allows you to start CD playback simply by moving the CROSS- FADER from side to side.
A.Cue up the CD player you wish to start using the Fader Start function
B.Move the CROSSFADER all the way to the opposite side of the CD you have just cued.
C.Press the FADER START SELECTOR button so that the button becomes illuminated.
D.At the point in which you wish to start the audio from the cued CD, simply move the CROSSFADER in the direction of the cued CD player, and playback will begin.
E.When the CROSSFADER is moved all the way to the opposite side of the currently playing disc, the unit will stop playing that disc and return to the beginning of the track or the set cue
39CROSS FADER: The CROSS FADER allows you to mix evenly from one source to another. The CROSS FADER on the
6
