Bosch Appliances PLE-2MA120-US, PLE-2MA240-US manual Technical data, Electrical

Page 33

Plena Mixer Amplifier Installation and User Instructions Technical data

en 31

6Technical data

6.1Electrical

6.1.1Mains power supply

Voltage

115 - 230 VAC, ±10%, 50/60 Hz

Inrush Current PLE-2MA120-US

8/16 A (230/115 VAC)

Inrush Current PLE-2MA240-US

9/19 A (230/115 VAC)

6.1.2Battery power supply

Voltage

24 VDC, ±15%

Current PLE-2MA120-US

6 A

Current PLE-2MA240-US

12 A

Charge current 0.5 ADC

Charge float voltage 27.4 VDC

6.1.3Power consumption

PLE-2MA120-US (mains)

400 VA

PLE-2MA240-US (mains)

800 VA

6.1.4Performance

Frequency response

50 Hz to 20 kHz (+1/-3 dB @ -10 dB ref. rated output)

Distortion

<1% @ rated output power, 1 kHz

Low Control

Max -12/+12 dB (frequency is level dependent) Hi Control

Max -12/+12 dB (frequency is level dependent)

6.1.5RJ-45 input 2 x

Call station input

For PLE-2CS(MM)

Wall panel input

For PLE-WP3S2Z

6.1.6Mic/line input 6 x

Input 1 (Push-to-talk contact with ducking functionality)

5-pin Euro style, balanced, phantom

Input 2-6 (VOX with ducking functionality on input 2)

5-pin Euro style, balanced, phantom Sensitivity

1 mV (mic); 200 mV (line) Impedance

>1 kohm (mic); >5 kohm (line) S/N (flat at max volume)

63 dB

S/N (flat at min volume/muted) >5 dB

Dynamic range 100 dB

S/N (flat at max volume) >63 dB (mic); >70 dB (line)

S/N (flat at min volume/muted) >75 dB

CMRR

>40 dB (50 Hz to 20 kHz)

Headroom >25 dB Speech filter

-3 dB @ 315 Hz, high-pass, 6 dB/oct Phantom power supply

16 V via 1.2 kohm (mic)

Speech filter

-3 dB @ 315 Hz, high-pass,

6 dB/oct

VOX (input 1 & 2)

attack time 150 ms; release time 2 s

Bosch Security Systems 2007-10 PLE-2MA120-US, PLE-2MA240-US en

Image 33 Contents
Plena Mixer Amplifier Alerts on the apparatus Important safeguardsPage Thank you for choosing a Bosch Security Systems product Table of contents Operation Introduction Conversion of units of mass Conversion tablesDescription Contents of boxPlena product range Plena Mixer AmplifierSchematic overview of the Plena Mixer Amplifier Controls, connectors and indicators Front panelPlena PLE-WP2Z3S wall panel Rear panel Rear panel Intentionally left blank Install unit in rack optional InstallationCheck settings/connections Unpack unitIntentionally left blank Connections and settings Connecting inputsDC supply battery Priority microphone input Euro connector with triggerAdditional microphones inputs 3 through Secondary microphone inputEmergency inputs Connecting 70 Volt input signalConnecting emergency telephone lines Music source inputs Connecting music source inputsZone 1 Connecting outputsCall only Music onlyConstant voltage loudspeakers Connecting speakersRear panel settings Unit settingsRotary controls Pin settings and labelling Intentionally left blank Switch off Switch on and offSwitch on Operation Microphone/line controls Music controls Tone control Master volume control Output controlsZone selection Intentionally left blank Electrical Technical dataEnvironmental MechanicalPage For more information visit