Arcam AVR400 manual Multi-room Set up, Zone 2 control connections

Page 48

multi-room

set up

The AVR400 allows independent routing and control of analogue audio and Composite video to a separate set of equipment, typically used for a second living space, e.g., bedroom or lounge.

The connection guide on the following page shows how the AVR400 is normally connected in a multi-room installation.

Zone 2

Zone 2 receives only signals obtained by the AVR400 from the analogue audio and Composite video inputs. The analogue inputs are required because there is no analogue-to-digital, digital-to-analogue or DSP processing available for Zone 2 signals – the AVR400 only converts video formats for Zone 1.

For this reason, we recommend that in addition to any digital connections, the analogue audio and Composite video outputs from your source devices are connected to the AVR400.

Video outputs

The Z2 Composite video output connectors of the AVR400 should be connected to the analogue video inputs (usually labelled Video In or Composite Video in) of the display device in Zone 2.

Audio outputs

The Z2 Out, R and L phono sockets should be connected to the analogue audio inputs (Usually labelled Analogue Audio in) of the Zone 2 display device, or to the inputs of an additional stereo power amplifier in Zone 2 (for example, the Arcam P38).

Speaker outputs

If the main zone has a 5.1-channel surround sound speaker system (not a 7.1-channel system), the spare SBL and SBR speaker outputs can be used to power speakers in Zone 2, so that a power amplifier is not required. To configure the outputs, navigate to the “Spkr Types” option in the Setup Menu and set the option “Use Channels 6+7 for” to “Zone 2” (see page E-32).

Zone 2 control connections

The AVR400 also allows remote control from Zone 2.

Z2 IR

This allows the AVR400 to be

controlled remotely from Zone 2 via Infra-red remote control. Connect a remote IR receiver

in Zone 2 to allow control of the AVR400 from this listening/ viewing area.

For more information on remote IR receivers, see ‘Z1 IR’ on page E-17.

TRIG Z2

This allows the AVR400 to remotely switch on devices in Zone 2 when Zone 2 is selected. For example you could set your television in Zone 2 to switch on when ‘Zone 2’ is selected on AVR400.

For more information on triggers, see ‘Trigger connectors’onpageE-17.PleasenotethatnotallAVdevices have this feature, nor are triggers essential for listening and viewing in a separate zone.

E-46

Page 47 Page 49
Image 48
Page 47 Page 49
Contents N d b o o k AVR surround amplifier Page English Safety Important safety instructionsClass II product Safety information For European Customers EnglishFCC Information for US customers 1. Product Important notice Do not modify this productPage Contents Professional Installation?DIY setup? WelcomeBefore you Begin… Power Standby powerPlacing the unit Interconnect cablesTrademark acknowledgements Audio connectors Digital connectorsSpeaker connectors Preamplifier outputHdmi connectors GeneralMaking connections Component/RGB video connectors Zone 2 connectors Digital audio connectors EnglishMCH input Analogue audio inputs Front panel AUX input Analogue pre-amplifier outputsFront panel Phones socket Long cables or several inputs in parallel if requiredEnglish Blu-ray Disc Bd / DVD player Satellite receiverCD player BD/SATConnecting an iPod using the Arcam irDock Radio Connectors Aerial connectorsOther Connectors Speakers Centre SubwooferFront left and right Surround back left and right Surround left and rightConnecting speakers Using external power amplifiersConnecting subwoofers Bi-Amping the Front Left & Right speakersSwitching on OperationOperating your AVR400 Selecting a sourceUsing Zone Extended front panel menuUpdating firmware via USB Front panel Operation CR102 universal remote controller Inserting batteries into the remote controlUsing the remote control Device Mode / Source keys Useful informationControlling other devices Code blink-backAMP AMP Device Mode IPod commandsTUN TUN Device Mode DVD DVD/BD Device ModeNetwork commands SAT SAT Device Mode AV AV Device ModeAVR400 AVR400.SHIFT + Hselects AUX input on Duplicates function of YELlOW key for somePVR PVR Device Mode VCR VCR Device ModeCD CD Device Mode English Essential Setup Speaker typesSpeaker Distances Speaker LevelsAuto speaker Setup ProblemsUsing a subwoofer Setup menus Navigating the setup menuInput Config Treble BassGeneral Setup Auto SetupOff default no audio compression is applied General information and system controlsNone speaker not present in your configuration Spkr TypesSpkr Distance Spkr LevelsVideo Inputs Video OutputsMode Zone Settings NetworkDecoding Modes IntroductionTwo-channel source modes High resolution audio sources Multi-channel source modesDecoding modes For Dolby Digital sourcesSettings Volume LevellerDolby Volume is a sophisticated new Calibration OffsetEnglish Tuning/Channel Selection Saving and selecting PresetsDeleting Presets Tuner OperationNetwork/usb Operation Selecting the playback sourceUSB playback Internet radio stationsMulti-room Set up ZoneZone 2 control connections Multi-room connection guide Customising CR102 Code LearningVolume punch-through Creating MacrosKey Mover Mode Mover Locking/Unlocking a specific Device ModeTo restore a moved Device Mode key to its original state Copy a key between Device ModesMode key IR punch-through Resetting the CR102Problem Check that Switched off Wired network Network hardwareSpeakers Or DTS decoding modesSpecifications Continual improvement policyProduct Guarantee Worldwide GuaranteeClaims under guarantee Problems?Page Device code Tables Code Tabelle für Fremdgeräte Tabellen ApparaatcodesGBC GECHCM HYDNU-TEC OKIRBM RCAYU-MA-TU AVPGPX STS ADBNTL UPC3D LAB AKIAMW AtacomTSM TVEXMS AsciHNE IdteKPN SATPage SH230 Issue
Related manuals
Manual 34 pages 59.68 Kb

AVR400 specifications

The Arcam AVR400 is a high-performance AV receiver designed to provide an immersive home theater experience. As part of Arcam’s esteemed lineup, the AVR400 combines advanced technology with exceptional sound quality, catering to audiophiles and home cinema enthusiasts alike.

At the heart of the AVR400 is its impressive power amplification, providing 100 watts per channel across 7 channels, ensuring a robust performance capable of driving a wide range of speakers. This power output is complemented by a high-current design, which means the receiver can handle dynamic audio passages without distortion, offering clarity in both subtle and explosive soundtracks.

One of the standout features of the AVR400 is its support for various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio. This allows for an unparalleled audio experience, transporting users right into the heart of the action. Additionally, the AVR400 is equipped with the latest HDMI inputs, ensuring compatibility with a multitude of high-definition sources, including Blu-ray players, gaming consoles, and streaming devices.

The AVR400 also boasts advanced video processing capabilities, supporting 4K pass-through as well as upscaling of lower-resolution content to 4K. This makes it an ideal choice for users looking to future-proof their home theater setup, as it can seamlessly integrate with modern 4K televisions while enhancing the quality of older content.

User-friendliness is another essential characteristic of the Arcam AVR400. It comes equipped with an intuitive on-screen menu system that simplifies the setup process. The inclusion of an automatic calibration system helps optimize speaker settings in accordance with the room acoustics, ensuring users achieve the best sound possible from their setup.

Furthermore, the network features of the AVR400 allow for streaming audio from various online services and wireless devices. Built-in support for DLNA enables users to access their media library wirelessly, while the USB input allows for direct playback from flash drives or external hard drives.

In terms of build quality, the Arcam AVR400 embodies the brand’s commitment to excellence. With a sleek design, high-quality materials, and an engineered chassis that minimizes vibration and interference, the AVR400 is not only visually appealing but also built to deliver performance over time.

In summary, the Arcam AVR400 is a feature-rich AV receiver offering a perfect blend of power, precision, and versatility. Whether for movie nights or music listening, it stands out as a reliable choice for those seeking high-quality audio and video reproduction in their home entertainment systems.
Top Page Image Contents