Arcam AVR400 manual English, FCC Information for US customers 1. Product

Page 5

FCC Information (for US customers) 1. Product

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2. Important notice:

do not modify this product

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by ARCAM may void your authority, granted by the FCC, to use the product.

3. Note

This product has been tested and found to comply with the limits for a Class B digital device, persuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the product into an outlet on a circuit different from that to which the receiver is connected.

•Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for help.

English

Safety information

(for European Customers)

•Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack.

•Handle the power cord carefully. Hold the plug when unplugging the cord.

•Keep the unit free from moisture, water, and dust.

•Unplug the power cord when not using the unit for long periods of time.

•Do not obstruct the ventilation holes.

•Do not let foreign objects into the unit.

•Do not let insecticides, benzene, and thinner come in contact with the unit.

•never disassemble or modify the unit in any way.

•Ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths or curtains.

•naked flame sources such as lighted candles should not be placed on the unit.

•Observe and follow local regulations regarding battery disposal.

•Do not expose the unit to dripping or splashing fluids.

•Do not place objects filled with liquids, such as vases, on the unit.

•Do not handle the mains cord with wet hands.

•When the switch is in the OFF position, the equipment is not completely switched off from

MAINS.

•The equipment shall be installed near the power supply so that the power supply is easily accessible.

A Note ABOut RECYCLinG:

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations.When discarding the unit, comply with local rules or regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning battery disposal.

This product and the supplied accessories, excluding the batteries, constitute the applicable product according to the WEEE directive.

CorRect disposal of this product

These markings indicate that this product should not be disposed with other household waste throughout the EU.

To prevent possible harm to the environment or human health from uncontrolled waste disposal and to conserve

material resources, this product should be recycled responsibly.

To dispose of your product, please use your local return and collection systems or contact the retailer where the product was purchased.

E-3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents N d b o o k AVR surround amplifier Page English Class II product SafetyImportant safety instructions English Safety information For European CustomersFCC Information for US customers 1. Product Important notice Do not modify this productPage Professional Installation? ContentsDIY setup? WelcomeBefore you Begin… Standby power PowerPlacing the unit Interconnect cablesTrademark acknowledgements Digital connectors Audio connectorsSpeaker connectors Preamplifier outputMaking connections Hdmi connectorsGeneral Digital audio connectors English Component/RGB video connectors Zone 2 connectorsAnalogue pre-amplifier outputs MCH input Analogue audio inputs Front panel AUX inputFront panel Phones socket Long cables or several inputs in parallel if requiredEnglish Satellite receiver Blu-ray Disc Bd / DVD playerCD player BD/SATConnecting an iPod using the Arcam irDock Aerial connectors Radio ConnectorsOther Connectors Centre Subwoofer SpeakersFront left and right Surround back left and right Surround left and rightUsing external power amplifiers Connecting speakersConnecting subwoofers Bi-Amping the Front Left & Right speakersOperation Switching onOperating your AVR400 Selecting a sourceUpdating firmware via USB Using ZoneExtended front panel menu Front panel Operation Using the remote control CR102 universal remote controllerInserting batteries into the remote control Useful information Device Mode / Source keysCode blink-back Controlling other devicesIPod commands AMP AMP Device ModeNetwork commands TUN TUN Device ModeDVD DVD/BD Device Mode AV AV Device Mode SAT SAT Device ModeAVR400 AVR400.SHIFT + Hselects AUX input on Duplicates function of YELlOW key for someVCR VCR Device Mode PVR PVR Device ModeCD CD Device Mode English Speaker types Essential SetupSpeaker Distances Speaker LevelsUsing a subwoofer Auto speaker SetupProblems Navigating the setup menu Setup menusTreble Bass Input ConfigAuto Setup General SetupOff default no audio compression is applied General information and system controlsSpkr Types None speaker not present in your configurationSpkr Distance Spkr LevelsMode Video InputsVideo Outputs Network Zone SettingsTwo-channel source modes Decoding ModesIntroduction Multi-channel source modes High resolution audio sourcesDecoding modes For Dolby Digital sourcesVolume Leveller SettingsDolby Volume is a sophisticated new Calibration OffsetEnglish Saving and selecting Presets Tuning/Channel SelectionDeleting Presets Tuner OperationSelecting the playback source Network/usb OperationUSB playback Internet radio stationsZone 2 control connections Multi-room Set upZone Multi-room connection guide Code Learning Customising CR102Key Mover Volume punch-throughCreating Macros Locking/Unlocking a specific Device Mode Mode MoverTo restore a moved Device Mode key to its original state Copy a key between Device ModesResetting the CR102 Mode key IR punch-throughProblem Check that Wired network Network hardware Switched offSpeakers Or DTS decoding modesContinual improvement policy SpecificationsWorldwide Guarantee Product GuaranteeClaims under guarantee Problems?Page Code Tabelle für Fremdgeräte Tabellen Apparaatcodes Device code TablesGEC GBCHCM HYDOKI NU-TECRBM RCAGPX YU-MA-TUAVP ADB STSNTL UPCAKI 3D LABAMW AtacomTVE TSMXMS AsciIdte HNEKPN SATPage SH230 Issue
Related manuals
Manual 34 pages 59.68 Kb

AVR400 specifications

The Arcam AVR400 is a high-performance AV receiver designed to provide an immersive home theater experience. As part of Arcam’s esteemed lineup, the AVR400 combines advanced technology with exceptional sound quality, catering to audiophiles and home cinema enthusiasts alike.

At the heart of the AVR400 is its impressive power amplification, providing 100 watts per channel across 7 channels, ensuring a robust performance capable of driving a wide range of speakers. This power output is complemented by a high-current design, which means the receiver can handle dynamic audio passages without distortion, offering clarity in both subtle and explosive soundtracks.

One of the standout features of the AVR400 is its support for various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio. This allows for an unparalleled audio experience, transporting users right into the heart of the action. Additionally, the AVR400 is equipped with the latest HDMI inputs, ensuring compatibility with a multitude of high-definition sources, including Blu-ray players, gaming consoles, and streaming devices.

The AVR400 also boasts advanced video processing capabilities, supporting 4K pass-through as well as upscaling of lower-resolution content to 4K. This makes it an ideal choice for users looking to future-proof their home theater setup, as it can seamlessly integrate with modern 4K televisions while enhancing the quality of older content.

User-friendliness is another essential characteristic of the Arcam AVR400. It comes equipped with an intuitive on-screen menu system that simplifies the setup process. The inclusion of an automatic calibration system helps optimize speaker settings in accordance with the room acoustics, ensuring users achieve the best sound possible from their setup.

Furthermore, the network features of the AVR400 allow for streaming audio from various online services and wireless devices. Built-in support for DLNA enables users to access their media library wirelessly, while the USB input allows for direct playback from flash drives or external hard drives.

In terms of build quality, the Arcam AVR400 embodies the brand’s commitment to excellence. With a sleek design, high-quality materials, and an engineered chassis that minimizes vibration and interference, the AVR400 is not only visually appealing but also built to deliver performance over time.

In summary, the Arcam AVR400 is a feature-rich AV receiver offering a perfect blend of power, precision, and versatility. Whether for movie nights or music listening, it stands out as a reliable choice for those seeking high-quality audio and video reproduction in their home entertainment systems.
Top Page Image Contents