Arcam AVR400 manual Problem Check that

Page 54

trouble­ shooting

Problem

Check that...

There are no lights on the unit

< the power cord is plugged into the AVR400 and the mains socket it is

 

plugged into is switched on.

 

< the power button is pressed in.

 

If a red LED is present, the AVR400 is in standby mode. Press any button on the

 

front panel or remote control.

The unit responds erratically

< there are fresh batteries in the remote control.

or not at all to the remote

< the front panel window is visible and you are pointing the remote control

control

towards it.

 

The front panel display is

< the display hasn’t been turned off. Press the DISPLAY button on the front

blank

panel or remote control.

No picture is being produced

< your viewing device is turned on and switched to display your AVR400. Test

 

by pressing the MENU button on the AVR400 or on the remote and look for

 

the main menu screen on your display device.

 

< the correct video input is selected on the AVR400.

 

< the “Video Source” has been set correctly in the “Input Config.” menu

 

< the video source is on, is operating normally, and is in ‘play’ mode if

 

appropriate.

 

< you have the AVR400 in a video resolution that is compatible with the

 

connection you are using and with your display device. For example,

 

composite video is only capable of carrying 480i and 576i resolutions. Test

 

this by pressing and holding the OK key for more than two seconds to force

 

480i / 576i output resolutions.

There are bright edges or

< the cables used for analogue video connections are designed to carry video

‘ghosts’ on the picture

(i.e., they are 75Ω coaxial cables).

 

< ensure the ‘sharpness’ control on your display device is switched off or set to

 

near minimum.

 

< for HDMI connections, try using a shorter cable or alternatively a different

 

brand.

No sound is produced

< the correct input has been selected.

 

< the “Audio Source” has been set correctly in the “Input Config.” menu

 

< the source equipment is on, is operating normally and is in ‘play’ mode if

 

appropriate.

 

< the volume is turned up to a reasonable level and the AVR400 is not in mute

 

mode.

The sound is poor or distorted

< you have not excessively increased the input sensitivity (i.e. reduced the

 

maximum input signal voltage) in the Input Config. menu if an analogue

 

input is being used.

 

< you have selected the correct size of speakers to suit your system in the setup

 

menu.

E-52

Image 54
Contents N d b o o k AVR surround amplifier Page English Safety Important safety instructionsClass II product FCC Information for US customers 1. Product Safety information For European CustomersEnglish Important notice Do not modify this productPage DIY setup? ContentsProfessional Installation? WelcomeBefore you Begin… Placing the unit PowerStandby power Interconnect cablesTrademark acknowledgements Speaker connectors Audio connectorsDigital connectors Preamplifier outputHdmi connectors GeneralMaking connections Component/RGB video connectors Zone 2 connectors Digital audio connectors EnglishFront panel Phones socket MCH input Analogue audio inputs Front panel AUX inputAnalogue pre-amplifier outputs Long cables or several inputs in parallel if requiredEnglish CD player Blu-ray Disc Bd / DVD playerSatellite receiver BD/SATConnecting an iPod using the Arcam irDock Radio Connectors Aerial connectorsOther Connectors Front left and right SpeakersCentre Subwoofer Surround back left and right Surround left and rightConnecting subwoofers Connecting speakersUsing external power amplifiers Bi-Amping the Front Left & Right speakersOperating your AVR400 Switching onOperation Selecting a sourceUsing Zone Extended front panel menuUpdating firmware via USB Front panel Operation CR102 universal remote controller Inserting batteries into the remote controlUsing the remote control Device Mode / Source keys Useful informationControlling other devices Code blink-backAMP AMP Device Mode IPod commandsTUN TUN Device Mode DVD DVD/BD Device ModeNetwork commands AVR400 AVR400.SHIFT + Hselects AUX input on SAT SAT Device ModeAV AV Device Mode Duplicates function of YELlOW key for somePVR PVR Device Mode VCR VCR Device ModeCD CD Device Mode English Speaker Distances Essential SetupSpeaker types Speaker LevelsAuto speaker Setup ProblemsUsing a subwoofer Setup menus Navigating the setup menuInput Config Treble BassOff default no audio compression is applied General SetupAuto Setup General information and system controlsSpkr Distance None speaker not present in your configurationSpkr Types Spkr LevelsVideo Inputs Video OutputsMode Zone Settings NetworkDecoding Modes IntroductionTwo-channel source modes Decoding modes High resolution audio sourcesMulti-channel source modes For Dolby Digital sourcesDolby Volume is a sophisticated new SettingsVolume Leveller Calibration OffsetEnglish Deleting Presets Tuning/Channel SelectionSaving and selecting Presets Tuner OperationUSB playback Network/usb OperationSelecting the playback source Internet radio stationsMulti-room Set up ZoneZone 2 control connections Multi-room connection guide Customising CR102 Code LearningVolume punch-through Creating MacrosKey Mover To restore a moved Device Mode key to its original state Mode MoverLocking/Unlocking a specific Device Mode Copy a key between Device ModesMode key IR punch-through Resetting the CR102Problem Check that Speakers Switched offWired network Network hardware Or DTS decoding modesSpecifications Continual improvement policyClaims under guarantee Product GuaranteeWorldwide Guarantee Problems?Page Device code Tables Code Tabelle für Fremdgeräte Tabellen ApparaatcodesHCM GBCGEC HYDRBM NU-TECOKI RCAYU-MA-TU AVPGPX NTL STSADB UPCAMW 3D LABAKI AtacomXMS TSMTVE AsciKPN HNEIdte SATPage SH230 Issue
Related manuals
Manual 34 pages 59.68 Kb

AVR400 specifications

The Arcam AVR400 is a high-performance AV receiver designed to provide an immersive home theater experience. As part of Arcam’s esteemed lineup, the AVR400 combines advanced technology with exceptional sound quality, catering to audiophiles and home cinema enthusiasts alike.

At the heart of the AVR400 is its impressive power amplification, providing 100 watts per channel across 7 channels, ensuring a robust performance capable of driving a wide range of speakers. This power output is complemented by a high-current design, which means the receiver can handle dynamic audio passages without distortion, offering clarity in both subtle and explosive soundtracks.

One of the standout features of the AVR400 is its support for various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio. This allows for an unparalleled audio experience, transporting users right into the heart of the action. Additionally, the AVR400 is equipped with the latest HDMI inputs, ensuring compatibility with a multitude of high-definition sources, including Blu-ray players, gaming consoles, and streaming devices.

The AVR400 also boasts advanced video processing capabilities, supporting 4K pass-through as well as upscaling of lower-resolution content to 4K. This makes it an ideal choice for users looking to future-proof their home theater setup, as it can seamlessly integrate with modern 4K televisions while enhancing the quality of older content.

User-friendliness is another essential characteristic of the Arcam AVR400. It comes equipped with an intuitive on-screen menu system that simplifies the setup process. The inclusion of an automatic calibration system helps optimize speaker settings in accordance with the room acoustics, ensuring users achieve the best sound possible from their setup.

Furthermore, the network features of the AVR400 allow for streaming audio from various online services and wireless devices. Built-in support for DLNA enables users to access their media library wirelessly, while the USB input allows for direct playback from flash drives or external hard drives.

In terms of build quality, the Arcam AVR400 embodies the brand’s commitment to excellence. With a sleek design, high-quality materials, and an engineered chassis that minimizes vibration and interference, the AVR400 is not only visually appealing but also built to deliver performance over time.

In summary, the Arcam AVR400 is a feature-rich AV receiver offering a perfect blend of power, precision, and versatility. Whether for movie nights or music listening, it stands out as a reliable choice for those seeking high-quality audio and video reproduction in their home entertainment systems.