Arcam AVR400 manual CD CD Device Mode

CD CD Device Mode

The cDevice Mode button configures the CR102 to control the CD functions of Arcam CD players, although this can be changed (see page E-25). Pressing this button also selects CD as the AVR400 source.

PToggles power between standby and on.

0…9	Functions as original remote number key.
PHONO	Selects Display input on the AVR400.
E
RPT	Toggles random (‘shuffle’) play on and off.
	SHIFT + rcycles through the repeat
r
	options (track, disc, etc.).

SModifies many keys (see individual key descriptions, below)

	Selects multichannel (MCH) input on
AUX	AVR400.

HSHIFT + Hselects AUX input on the AVR400.

NET	Selects iPOD input on AVR400.
	SHIFT + eselects network (NeT) internal
e
	input on the AVR400.
	Navigates track listings if supported by the
	player.
	OK selects the currently highlighted track if
	supported by the player

MChanges the time display modes on Arcam CD player

U(not used)

Cycles through the front panel display’s

Dbrightness options.

SHIFT + Denables RPT A-Bfunctionality if supported by the player.

@Toggles the mute function. By default this key operates the AVR400 Mute.

]Press and release to skip back to the beginning of the current/previous track.

[Press and release to skip forwards to the beginning of the next track.

Decrease (–) and increase (+) AVR400 - + volume.

)Fast rewind

$ Play

&Toggles pause of playback

(Fast forward

!Open/close disc tray

#Stop playback

%Start recording (on products that have this feature)

hScans first 10 seconds of each track on CD, if supported by the player (Audio search)

FAV+	Starts Program mode
u
FAV-	Clears programmed item
t
Home	(not used)
o
Info	(not used)
b

E-30