English
FM/AM Tuner Control Function
Tuner Control Screen (Shift)
3Traffic Information Function
You can listen to traffic information. If you are listening to discs, they will continue playing until a traffic bulletin is broadcast.
Turning TI function On/Off:
Touch [ TI ] on the control screen to turn the function on and off.
When the function is on, the TI indicator is turned on. When a traffic information station is received, the TI indicator blinks.
If you are listening to a disc when a traffic bulletin begins, playback will be interrupted. When the bulletin ends or poor reception causes signal losses , the disc will continue to play again.
Switching to a Different Traffic Information Station: Use [ 4 ] / [ ¢ ] to make an auto seek of the TI stations in a certain band.
NOTE
•When you are listening to a disc, you cannot change to another TI station.
•When the auto TP seek function is turned on and reception starts to weaken, the tuner automatically seeks stations with better reception.
•If you are tuned to a station that is not a traffic information station itself but which provides EON services, you can still have traffic information received.
3Presetting the Volume for Traffic Information/News
Preset the volume to be used when traffic information/news starts to be broadcast.
1Tune into the station for which you want to set the volume.
2Adjust the volume to the desired level.
3Keep touching [ TI VOL ] for two seconds or more.
The volume level that the data has been stored. Future traffic information broadcasts are heard at the preset level.
NOTE
•The volume cannot be lowered by this function during tuner reception. The volume is only set when it is louder than the listening volume of the tuner.
•You can arrange only to listen to traffic information /news bulletins with at preset volume with the volume set at minimum.
3Returning to the Tuner Control Screen (Main)
Touch [ 
] to return to the tuner contorl screen (Main).
20