Kenwood KVC-1000 instruction manual Name Set Function, Name Set Screen

Name Set Function

Name Set Screen

		B E S T				H I T S
			A	B	C	D	E	F
A B
a b			G		H	I	J	K	L
	2		M		N	O	P	Q	R	S P C
1
Ä	ä		S		T	U	V	W	X
			Y		Z
N A M E				S E T							O K

3Station Name Preset (SNPS) /Disc Name Preset (DNPS)

1If the cursor is in the desired character input position, go on to step 4. If not, touch either [ 2 ] or [ 3 ] to move the cursor to the desired position. Touching [ 2 ] moves the cursor to the left and touching [ 3 ] moves it to the right.

2Touch [ ∞ ] or [ 5 ] to switch the character lists.

NOTE

When all characters are displayed on the character list, [ ∞ ] and [ 5 ] do not appear.

3Touch [ A B ], [ a b ], [ 1 2 ] or [ Ä ä ] to switch the character lists.

4Touch a character.

5Continue steps 1 and 4 until all the characters have been input for the name.

NOTE

•You can enter up to 12 characters for each name.

•To enter a space, touch [ SPC ]. A blank is inserted and the cursor moves to the right.

6Touch [ OK ] to finish name entry and leave the name preset mode.

NOTE

•If you want to change the name of a station, first display the name of the station (following step 1), then change the letter(s) that you by following steps 2, and 4.

•You can assign names for up to 30 TV stations.

•You can only store names for up to 100 CDs. If you store the name for an 101st CD, the first one will be erased automatically.

•CDs are identified by their total length and number of tracks. If you play another CD that happens to have exactly the same specifications as another CD whose name is stored, the wrong name may be displayed.

English

27