Kenwood KVC-1000 instruction manual Mask Key, Ending the Code Security Screen

Code Security Screen

English

T h e s y s t e m i s n o w

w a i t i n g f o r y o u r M A S K K E Y s i g n a l .

P l e a s e i n p u t n o w .

C O D E S E C U R I T Y RTN

3Mask Key

If you have transmitted the Mask Key's signal once to the unit in advance, you will have to transmit it once again if the unit has been removed from the battery. This function helps prevent theft.

When using the unit for the first time:

If this procedure is not carried out, the control panel of the unit will re-open even with your vehicle's ignition turned off.

1Hold down the transmit button on the Mask Key until the half transmit level indicator lights up in the display. “System now checking for valid signal code”will be displayed.

Transmission part

Transmit button

NOTE

•Keep the Mask Key close to the signal sensor when you transmit the Mask Key signal.

•If the Mask Key signal does not be received correctly, the display will return to “Code rejected. Please check MASK KEY”. In this case, repeat the procedure in step 1.

2Hold down the transmit button on the Mask Key again until the full transmit level indicator lights up in the display.

"Code APPROVED" will appear in the display, with the Mask Key function turning on.

If you press the RESET button or remove the battery: The first time you turn the unit on again, “The system in now waiting for your MASK KEY signal. Please input now.” will appear in the display, indicating the setting mode has been entered. Repeat steps 1 and 2 above, and transmit the signal.

You can start operating the unit again when "Code APPROVED" appears in the display.

3Ending the Code Security Screen

Touch [ RTN ] to return to the setup menu screen.

S y s t e m	n o w
c h e c k i	n g f o r v a l i d
s i g n a l	c o d e .

C O D E S E C U R I T Y RTN

S y s t e m	n o w
c h e c k i	n g f o r v a l i d
s i g n a l	c o d e .

C O D E S E C U R I T Y RTN

11