Pioneer GM-X574, GM-X374 owner manual Power Indicator, BFC Beat Frequency Control Switch

Page 5

Power Indicator

The power indicator lights when the power is switched on.

BFC (Beat Frequency Control) Switch

If you hear a beat while listening to an MW/LW broadcast with your car stereo, change the BFC switch using a small standard tip screwdriver.

LPF (Low-Pass Filter)/HPF (High-Pass Filter) Select Switch

Set the LPF/HPF select switch as follows according to the type of speaker that is connected to the speaker output connector and the car stereo system:

LPF/HPF Select

Audio frequency range

Speaker

Remarks

Switch

to be output

Type

 

LPF (Left)

Very Low Frequency range

Subwoofer

Connect a subwoofer.

 

 

 

 

OFF (Center)

Full range

Full range

 

 

 

 

 

HPF (Right)

Low Frequency range to

Full range

Use if you want to cut the

 

High Frequency range

 

very low frequency range

 

 

 

because it is not necessary

 

 

 

for the speakers you are

 

 

 

using.

 

 

 

 

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

4

Image 5
Contents GM-X574 GM-X374 Contents Case of trouble Before Using This ProductComposition of Manual Gain Control Setting the UnitInput Select Switch LPF Low-Pass Filter/HPF High-Pass Filter Select Switch Power IndicatorBFC Beat Frequency Control Switch To prevent damage Connecting the UnitGM-X574 Speaker Channel Speaker Type Power GM-X374 Speaker Channel Speaker Type Power Connection Diagram Terminals Connecting the Power TerminalConnecting the Speaker Output Connections when using the speaker input Using the Speaker InputFour-channel mode Connecting the Speaker wiresThree-channel mode Terminal a Terminal BTwo-channel mode Mono Two-channel mode StereoTo prevent malfunction InstallationExample of installation on the floor mat or on the chassis Average current drawn SpecificationsGM-X574 10.9 a 4 Ω for two channels GM-X37430 a 265 W ⋅ 50 H ⋅ 237 D mmEjemplo de instalación en la alfombra del ContenidoInterruptor de selección LPF Filtro de paso Composición de manual Antes de usar este productoEn caso de desperfectos Verifique las conexiones del suministro deInterruptor de selección de entrada Ajuste de esta unidadControl de ganancia Interruptor BFC Control de la frecuencia de batido Indicador de alimentaciónPara prevenir de daños Conexión de la unidadGM-X574 Tipo de altavoz AlimentaciónGM-X374 Diagrama de conexión Conexión del terminal de salida de altavoz Conexión del terminal de alimentaciónConexiones cuando se usa la entrada de altavoz Uso de la entrada de altavozModo de tres canales Conexión de los cables de altavocesModo de cuatro canales Modo de dos canales mono Modo de dos canales estéreoPara evitar fallas del funcionamiento InstalaciónConsumo de corriente promedio EspecificacionesNota 10,9 a 4 Ω para dos canales 19,2 a potencia continua, 4 ΩAn ⋅ 50 Al ⋅ 237 Pr mm 45 W ⋅ 4 / 100 W ⋅ 2 DIN45324, +B = 14,4Anschluß der Lautsprecher-Ausgang InhaltsverzeichnisLPF Tiefpaßfilter/HPF Hochpaßfilter Im Störungsfall Vor Gebrauch dieses ProduktsAufbau der Anleitung Eingangswahlschalter Einstellen dieses GerätsVerstärkungsregelung LPF Tiefpaßfilter/HPF Hochpaßfilter-Wahlschalter StromanzeigeInterferenzschutzschalter BFC GM-X574 Lautsprecherkanal Lautsprechertyp Stromversorgung Anschluß der EinheitUm Schäden zu vermeiden GM-X374 Lautsprecherkanal Lautsprechertyp Stromversorgung Sicherung 30 a Tülle AuschlußschemaLautsprecher-Eingangs Fortseite RCA-Ausgangsbuchsen RCA-Eingangsbuchsen a RückseiteAnschluß der Lautsprecher- Ausgang-Klemmen Anschluß der StromversorgungLautsprecher Ausgangklemme Lautsprecherkabel Benutzung des Lautsprecher- EingangsKlemmenschraube Drei-Kanal-Modus Anschließen der LautsprecherkabelVier-Kanal-Modus Lautsprecher Rechts Zwei-Kanal-Modus StereoZwei-Kanal-Modus Mono Verhindern von Fehlfunktionen EinbauDurchschnittliche Stromentnahme Technische DatenHinweis 265 B ⋅ 50 H ⋅ 237 T mm 19,2 a bei gleichbleibendem Strom, 4 Ω10,9 a 4 Ω für Zwei-Kanal Exemple d’installation sur le tapis de sol ou Interrupteur BFC Commande de fréquenceTable des matières Sélecteur LPF Filtre passe-basEn cas d’anomalie Avant d’utiliser cet appareilComposition du manuel Sélecteur d’entrée Commande du gainRéglage de l’appareil Sélecteur LPF Filtre passe-bas/HPF Filtre passe-haut Témoin d’alimentationSélecteur Gamme des fréquences Type de haut Remarques Disponibles en sortie ParleurGM-X574 Voie de sortie Type de haut-parleur Puissance Raccordement de l’appareilPour éviter toute anomalie GM-X374 Voie de sortie Type de haut-parleur Puissance De prises d’entrée Schéma de raccordementCâbles de liaison munis de prises Cinch Cinch RCA Prises Cinch RCASortie vers les haut-parleurs Raccordement de la borne d’alimentationRaccordement des bornes de Usage de l’entrée de haut-parleur Mode trois voies Mode quatre voiesConnexion des câbles des haut-parleurs Droite Sortie haut-parleur B GaucheHaut-parleur Droite Haut-parleur Mono Mode deux voies stéréoMode deux voies mono ’installez pas l’appareil Exemple d’installation sur le tapis de sol ou sur le châssisConsommation moyenne de courant Caractéristiques techniquesRemarque 265 L ⋅ 50 H ⋅ 237 P mm 19,2 a à la puissance continue, 4 Ω10,9 a 4 Ω pour deux voies Indice Esempio dell’installazione sul pavimentoCome collegare il terminale Come collegare il terminale di uscita degliCaso di difficotà Prima di usare questo prodottoComposizione del manuale di istruzioni Selettore di ingresso Regolazione di questa unitàComando del guadagno Commutatore BFC Comando della frequenza di battimento Indicatore dell’alimentazioneSelettore LPF filtro passa-basso/HPF filtro passa-alto Tipo di altoparlanti Alimentazione Come collegare l’unitàPer evitare danne Ingresso nominale Minimo 100 W Schema di collegamento Come collegare il terminale dell’alimentazione Come collegare il terminale diUscita degli altoparlanti Uscita altoparlante ’uso di ingresso dell’altoparlanteCollegamento quando serve ingresso altoparlante Modo a tre canali Collegamento dei cavi d’altoparlantiModo a quattro canali Modo a due canali mono Modo a due canali stereoDell’altoparlante Connettore di ingresso Dell’altoparlantePer evitare disfunzioni InstallazioneCorrente media consumata Caratteristiche7A 4 Ω per quattro canali 19,2 a ad alimentazione continua, 4 Ω10,9 a 4 Ω per due canali 265 L ⋅ 50 a ⋅ 237 P mmInhoudsopgave Voorbeeld van installatie op de vloermatSchakelaar voor de regeling van de LPF lage-doorlaatfilter/HPF hogeAlvorens gebruik Bij problemenIngangskeuzeschakelaar Instellen van dit toestelVersterkingsregelaar Die u gebruikt SpanningsindicatorSchakelaar voor de regeling van de slagfrequentie BFC GM-X574 Luidsprekerkanaal Luidsprekertype Vermogen Aansluiten van het toestelOm beschadiging te voorkomen GM-X374 Luidsprekerkanaal Luidsprekertype Vermogen Aansluitschema Aansluiten van het spanningsaansluitpunt Verbinden van de luidsprekerUitgangsaansluitingen Geval van Luidsprekeringangs de verbinding gebruiken Het gebruik van luidsprekeringangVier-kanalen functie Aansluiten van de luidsprekerdradenDrie-kanalen functie IngangskeuzeschakelaarTwee-kanalen functie mono Twee-kanalen functie stereoOm slechte werking te voorkomen InstallatieVoorbeeld van installatie op de vloermat of op het chassis Gemiddeld stroomverbruik Technische gegevensOpmerking 265 B ⋅ 50 H ⋅ 237 D mm 19,2 a met continu spanning, 4 Ω10,9 a 4 Ω voor twee kanalen Page Page Pioneer Corporation

GM-X574, GM-X374 specifications

The Pioneer GM-X374 and GM-X574 are distinguished amplifier models that capture the essence of dynamism and versatility in car audio systems. Both models are integral parts of the Pioneer amplifier series, designed to deliver high-performance sound amplification with advanced technological features, making them favorites among audio enthusiasts.

The GM-X374 is a 4-channel amplifier, allowing for versatile installation options in various vehicle configurations. One of its standout features is the compact, space-saving design, which facilitates easy mounting without consuming valuable real estate in the trunk or under seats. The amp boasts a power output of 50 watts per channel at 4 ohms and can deliver up to 90 watts per channel at 2 ohms. This ensures that users enjoy robust sound performance, even at higher volume levels, without distortion.

Pioneer's GM-X574 takes things up a notch with its 5-channel configuration, making it ideal for systems that require additional power for subwoofers. Its power output reaches 50 watts per channel for the four channels and a substantial 150 watts for the subwoofer channel at 4 ohms, ensuring a deep, resonant bass experience. This model is especially appealing to those who want to build a comprehensive sound system without needing multiple amplifiers.

Both amplifiers are equipped with an array of technologies that enhance their performance. The built-in crossover network allows users to tailor the sound output according to their preferences, making it easier to achieve a balanced audio experience. The adjustable high-pass and low-pass filters ensure that the right frequencies are sent to the appropriate speakers, vastly improving audio clarity.

Durability is another key characteristic of the GM-X374 and GM-X574. Both models are constructed with high-quality components designed to withstand the rigors of automotive environments. The heat sink design promotes efficient heat dissipation, allowing for extended use without overheating, thereby ensuring longevity and reliability.

The amplifiers are also equipped with RCA inputs, making them compatible with a wide array of head units. This flexibility allows for seamless integration into existing audio systems. These features, combined with easy installation options and a sleek design, make the Pioneer GM-X374 and GM-X574 excellent choices for anyone looking to elevate their car audio experience.