Pioneer GM-X574, GM-X374 Connecting the Power Terminal, Connecting the Speaker Output, Terminals

Page 9

Connecting the Power Terminal

•Always use the special red battery and ground wire [RD-223], which is sold separately. Connect the battery wire directly to the car battery positive terminal (+) and the ground wire to the car body.

1.Pass the battery wire from the engine compartment to the interior of the vehicle.

•After making all other connections to the amplifier, connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery.

Fuse (30 A) Engine

 

Interior of

compart-

the vehicle

ment

 

 

 

Fuse (30 A)

Drill a 14 mm

Positive terminal

hole into the

Insert the O-ring rubber

vehicle body.

 

 

grommet into the vehicle

 

 

body.

 

 

2.Twist the battery wire, ground wire and system remote control wire.

Twist

3.Attach lugs to wire ends. Lugs not supplied.

• Use pliers, etc., to crimp lugs to wires.

Lug

Ground wire

Lug

Battery wire

4. Connect the wires to the terminal.

System remote

Power terminal

ENGLISH

• Fix the wires securely with the terminal

 

screws.

 

 

 

GND terminal

 

control terminal

 

 

System remote

 

 

control wire

 

ESPAÑOL

Ground wire

 

 

 

 

Battery wire

DEUTSCH

Connecting the Speaker Output

 

Terminals

 

 

1. Expose the end of the speaker wires

 

using nippers or a cutter by about

 

10 mm and twist.

 

FRAN

 

Twist

 

ÇAIS

 

10 mm

 

 

2. Attach lugs to speaker wire ends.

 

Lugs not supplied.

ITALIANO

• Use pliers, etc., to crimp lugs to wires.

 

Lug

 

 

Speaker wire

 

 

 

NEDERLANDS

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents GM-X574 GM-X374 Contents Before Using This Product Composition of ManualCase of trouble Setting the Unit Input Select SwitchGain Control Power Indicator BFC Beat Frequency Control SwitchLPF Low-Pass Filter/HPF High-Pass Filter Select Switch Connecting the Unit GM-X574 Speaker Channel Speaker Type PowerTo prevent damage GM-X374 Speaker Channel Speaker Type Power Connection Diagram Connecting the Power Terminal Connecting the Speaker OutputTerminals Connections when using the speaker input Using the Speaker InputFour-channel mode Connecting the Speaker wiresThree-channel mode Terminal a Terminal BTwo-channel mode Mono Two-channel mode StereoInstallation Example of installation on the floor mat or on the chassisTo prevent malfunction Specifications GM-X574Average current drawn 10.9 a 4 Ω for two channels GM-X37430 a 265 W ⋅ 50 H ⋅ 237 D mmContenido Interruptor de selección LPF Filtro de pasoEjemplo de instalación en la alfombra del Composición de manual Antes de usar este productoEn caso de desperfectos Verifique las conexiones del suministro deAjuste de esta unidad Control de gananciaInterruptor de selección de entrada Interruptor BFC Control de la frecuencia de batido Indicador de alimentaciónPara prevenir de daños Conexión de la unidadGM-X574 Tipo de altavoz AlimentaciónGM-X374 Diagrama de conexión Conexión del terminal de salida de altavoz Conexión del terminal de alimentaciónConexiones cuando se usa la entrada de altavoz Uso de la entrada de altavozConexión de los cables de altavoces Modo de cuatro canalesModo de tres canales Modo de dos canales mono Modo de dos canales estéreoPara evitar fallas del funcionamiento InstalaciónEspecificaciones NotaConsumo de corriente promedio 10,9 a 4 Ω para dos canales 19,2 a potencia continua, 4 ΩAn ⋅ 50 Al ⋅ 237 Pr mm 45 W ⋅ 4 / 100 W ⋅ 2 DIN45324, +B = 14,4Inhaltsverzeichnis LPF Tiefpaßfilter/HPF HochpaßfilterAnschluß der Lautsprecher-Ausgang Vor Gebrauch dieses Produkts Aufbau der AnleitungIm Störungsfall Einstellen dieses Geräts VerstärkungsregelungEingangswahlschalter Stromanzeige Interferenzschutzschalter BFCLPF Tiefpaßfilter/HPF Hochpaßfilter-Wahlschalter Anschluß der Einheit Um Schäden zu vermeidenGM-X574 Lautsprecherkanal Lautsprechertyp Stromversorgung GM-X374 Lautsprecherkanal Lautsprechertyp Stromversorgung Sicherung 30 a Tülle AuschlußschemaLautsprecher-Eingangs Fortseite RCA-Ausgangsbuchsen RCA-Eingangsbuchsen a RückseiteAnschluß der Lautsprecher- Ausgang-Klemmen Anschluß der StromversorgungBenutzung des Lautsprecher- Eingangs KlemmenschraubeLautsprecher Ausgangklemme Lautsprecherkabel Anschließen der Lautsprecherkabel Vier-Kanal-ModusDrei-Kanal-Modus Zwei-Kanal-Modus Stereo Zwei-Kanal-Modus MonoLautsprecher Rechts Verhindern von Fehlfunktionen EinbauTechnische Daten HinweisDurchschnittliche Stromentnahme 19,2 a bei gleichbleibendem Strom, 4 Ω 10,9 a 4 Ω für Zwei-Kanal265 B ⋅ 50 H ⋅ 237 T mm Exemple d’installation sur le tapis de sol ou Interrupteur BFC Commande de fréquenceTable des matières Sélecteur LPF Filtre passe-basAvant d’utiliser cet appareil Composition du manuelEn cas d’anomalie Commande du gain Réglage de l’appareilSélecteur d’entrée Sélecteur LPF Filtre passe-bas/HPF Filtre passe-haut Témoin d’alimentationSélecteur Gamme des fréquences Type de haut Remarques Disponibles en sortie ParleurRaccordement de l’appareil Pour éviter toute anomalieGM-X574 Voie de sortie Type de haut-parleur Puissance GM-X374 Voie de sortie Type de haut-parleur Puissance De prises d’entrée Schéma de raccordementCâbles de liaison munis de prises Cinch Cinch RCA Prises Cinch RCARaccordement de la borne d’alimentation Raccordement des bornes deSortie vers les haut-parleurs Usage de l’entrée de haut-parleur Mode trois voies Mode quatre voiesConnexion des câbles des haut-parleurs Droite Sortie haut-parleur B GaucheMode deux voies stéréo Mode deux voies monoHaut-parleur Droite Haut-parleur Mono ’installez pas l’appareil Exemple d’installation sur le tapis de sol ou sur le châssisCaractéristiques techniques RemarqueConsommation moyenne de courant 19,2 a à la puissance continue, 4 Ω 10,9 a 4 Ω pour deux voies265 L ⋅ 50 H ⋅ 237 P mm Indice Esempio dell’installazione sul pavimentoCome collegare il terminale Come collegare il terminale di uscita degliPrima di usare questo prodotto Composizione del manuale di istruzioniCaso di difficotà Regolazione di questa unità Comando del guadagnoSelettore di ingresso Indicatore dell’alimentazione Selettore LPF filtro passa-basso/HPF filtro passa-altoCommutatore BFC Comando della frequenza di battimento Come collegare l’unità Per evitare danneTipo di altoparlanti Alimentazione Ingresso nominale Minimo 100 W Schema di collegamento Come collegare il terminale di Uscita degli altoparlantiCome collegare il terminale dell’alimentazione ’uso di ingresso dell’altoparlante Collegamento quando serve ingresso altoparlanteUscita altoparlante Collegamento dei cavi d’altoparlanti Modo a quattro canaliModo a tre canali Modo a due canali mono Modo a due canali stereoDell’altoparlante Connettore di ingresso Dell’altoparlantePer evitare disfunzioni InstallazioneCorrente media consumata Caratteristiche7A 4 Ω per quattro canali 19,2 a ad alimentazione continua, 4 Ω10,9 a 4 Ω per due canali 265 L ⋅ 50 a ⋅ 237 P mmInhoudsopgave Voorbeeld van installatie op de vloermatSchakelaar voor de regeling van de LPF lage-doorlaatfilter/HPF hogeAlvorens gebruik Bij problemenInstellen van dit toestel VersterkingsregelaarIngangskeuzeschakelaar Spanningsindicator Schakelaar voor de regeling van de slagfrequentie BFCDie u gebruikt Aansluiten van het toestel Om beschadiging te voorkomenGM-X574 Luidsprekerkanaal Luidsprekertype Vermogen GM-X374 Luidsprekerkanaal Luidsprekertype Vermogen Aansluitschema Verbinden van de luidspreker UitgangsaansluitingenAansluiten van het spanningsaansluitpunt Geval van Luidsprekeringangs de verbinding gebruiken Het gebruik van luidsprekeringangVier-kanalen functie Aansluiten van de luidsprekerdradenDrie-kanalen functie IngangskeuzeschakelaarTwee-kanalen functie mono Twee-kanalen functie stereoInstallatie Voorbeeld van installatie op de vloermat of op het chassisOm slechte werking te voorkomen Technische gegevens OpmerkingGemiddeld stroomverbruik 19,2 a met continu spanning, 4 Ω 10,9 a 4 Ω voor twee kanalen265 B ⋅ 50 H ⋅ 237 D mm Page Page Pioneer Corporation

GM-X574, GM-X374 specifications

The Pioneer GM-X374 and GM-X574 are distinguished amplifier models that capture the essence of dynamism and versatility in car audio systems. Both models are integral parts of the Pioneer amplifier series, designed to deliver high-performance sound amplification with advanced technological features, making them favorites among audio enthusiasts.

The GM-X374 is a 4-channel amplifier, allowing for versatile installation options in various vehicle configurations. One of its standout features is the compact, space-saving design, which facilitates easy mounting without consuming valuable real estate in the trunk or under seats. The amp boasts a power output of 50 watts per channel at 4 ohms and can deliver up to 90 watts per channel at 2 ohms. This ensures that users enjoy robust sound performance, even at higher volume levels, without distortion.

Pioneer's GM-X574 takes things up a notch with its 5-channel configuration, making it ideal for systems that require additional power for subwoofers. Its power output reaches 50 watts per channel for the four channels and a substantial 150 watts for the subwoofer channel at 4 ohms, ensuring a deep, resonant bass experience. This model is especially appealing to those who want to build a comprehensive sound system without needing multiple amplifiers.

Both amplifiers are equipped with an array of technologies that enhance their performance. The built-in crossover network allows users to tailor the sound output according to their preferences, making it easier to achieve a balanced audio experience. The adjustable high-pass and low-pass filters ensure that the right frequencies are sent to the appropriate speakers, vastly improving audio clarity.

Durability is another key characteristic of the GM-X374 and GM-X574. Both models are constructed with high-quality components designed to withstand the rigors of automotive environments. The heat sink design promotes efficient heat dissipation, allowing for extended use without overheating, thereby ensuring longevity and reliability.

The amplifiers are also equipped with RCA inputs, making them compatible with a wide array of head units. This flexibility allows for seamless integration into existing audio systems. These features, combined with easy installation options and a sleek design, make the Pioneer GM-X374 and GM-X574 excellent choices for anyone looking to elevate their car audio experience.
Top Page Image Contents