Pioneer DEH-P500UB operation manual Tuner, Basic Operations, Adjusting the volume

Section
02		Operating this unit
	! Charging the portable audio player using		Tuner
		car’s DC power source while connecting it to	Basic Operations
		AUX input may generate noise. In this case,
		stop charging.	% Select a band
	! External unit refers to a Pioneer product (such
			Press BAND/ESC.
		as ones available in the future) that, although
			# Band can be selected from among FM1, FM2,
		incompatible as a source, enables control of
			FM3 or AM.
		basic functions with this unit. Two external
		units can be controlled with this unit. When	% Manual tuning (step by step)
		two external units are connected, the external	Push MULTI-CONTROL left or right.
		unit is automatically allocated to external unit	% Seek tuning
		1 or external unit 2 by this unit.
	! When this unit’s blue/white lead is connected		Push and hold MULTI-CONTROL left or right
			for about one second and release.
		to the vehicle’s auto-antenna relay control
			# You can cancel seek tuning by pushing
		terminal, the vehicle’s antenna extends when
		this unit’s source is turned on. To retract the	MULTI-CONTROL left or right.
			# If you push and hold MULTI-CONTROL left or
		antenna, turn the source off.
			right, you can skip stations. Seek tuning starts as
	Adjusting the volume		soon as you release MULTI-CONTROL.

%Use MULTI-CONTROL to adjust the sound level.

Storing and recalling broadcast frequencies

You can easily store up to six broadcast fre- quencies for later recall.

!Six stations for each band can be stored in memory.

1 Press LIST.

Preset screen is displayed.

2Use MULTI-CONTROL to store the se- lected frequency in memory.

Turn to change the preset number. Press and

hold to store.

# You can also store the frequency in memory by pushing and holding MULTI-CONTROL right.

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station. Press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# To return to the ordinary display, press

BAND/ESC or LIST.

# If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display.

12 En