Sirius Satellite Radio tuner

Section

06Available accessories

2Use MULTI-CONTROL to store the se- lected station in memory.

Turn to change the preset number. Press and hold to store.

The XM preset number you have selected will flash and then remain lit. The selected station has been stored in memory.

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station; press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# If you do not operate the list within about 30 seconds, the display is automatically returned to the ordinary display.

Note

You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down.

Switching the XM channel select mode

You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category.

%Press SAT MODE repeatedly to select the desired channel select setting.

MODE CH NUMBER (channel number select setting)—MODE CATEGORY (channel cate-

gory select setting)

# If you do not operate the function within about 30 seconds, the display is automatically returned to the channel display.

Note

You can also perform this operation in the menu that appears by using MULTI-CONTROL.

Selecting a channel in the channel category

1Select the channel select settings to

MODE CATEGORY.

Refer to Switching the XM channel select mode on this page.

2Push MULTI-CONTROL up or down to select the desired channel category.

3Push MULTI-CONTROL left or right to select the desired channel in the selected channel category.

Displaying the Radio ID

Channel number select setting

1Select the channel select settings to

MODE CH NUMBER.

Refer to Switching the XM channel select mode on this page.

2Push MULTI-CONTROL left or right to

select RADIO ID.

# If you select another channel, display of the ID

code is canceled.

# Display of the ID code repeats displaying RADIO ID and the ID code one after the other.

Listening to SIRIUS Satellite Radio

You can use this unit to control a SIRIUS Satel- lite Radio tuner, which is sold separately. When the SIRIUS tuner is used together with this unit, some operations differ slightly from those described in the SIRIUS operation man- ual. This manual provides information on these points. For all other information on using the SIRIUS tuner, please refer to the SIR- IUS operation manual.

%Select a SIRIUS band.

Band can be selected from SR-1, SR-2 or SR-3.

42 En