| Section |
Audio Adjustments | 03 |
|
|
Q factor
#You can also perform the same operations by pushing
Note
A separate CUSTOM curve can be created for each source. (The
Adjusting loudness
Loudness compensates for deficiencies in the low- and
1Use
LOUDNESS.
2Press
3Use
Turn to change the setting.
LOW
(off)
# You can also perform the same operations by pushing
Using subwoofer output
This unit is equipped with a subwoofer output which can be turned on or off.
Also, phase can be selected between normal and reverse.
1Press SW to display the subwoofer set- ting mode.
Press SW repeatedly to switch between the subwoofer setting modes in the following order.
SW SETTING 1 (subwoofer on/off setting) set- ting
2Select SW SETTING 1 setting mode.
3Turn
NORMAL (normal
# You can also perform the same operations by pushing
Note
You can also switch to this setting mode in the menu that appears by using
Adjusting subwoofer settings
When the subwoofer output is on, you can ad- just the
1Press SW to display the subwoofer set- ting mode.
Press SW repeatedly to switch between the subwoofer setting modes in the following order.
SW SETTING 1 (subwoofer on/off setting) set- ting
2Select SW SETTING 2 setting mode.
3Press
Press
Cut off
4Turn
Cut off frequency
+6 to
English
En 25