Connecting the Units
When connecting with a rear view camera
When using this product with a rear view camera, automatic switching to video from a rear view camera when the gear shift is moved to REVERSE (R) position is possible.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE.
CAUTION
•The screen image may appear reversed.
•The rear view camera function is to be used as an aid for backing into a tight parking spot. Do not use this function for entertainment purposes.
•Objects in the rear view may appear closer or more distant than they actually are.
This product |
Rear view camera input |
(REAR VIEW |
CAMERA IN) |
CAUTION
You must use a camera which outputs mirror reversed images.
Rear view camera
20 cm | RCA cable |
| (sold separately) |
10 cm
Extension lead (supplied)
Violet/white
Of the two lead wires connected to the back lamp, connect the one in which the voltage changes when the gear shift is in the REVERSE (R) position. This connection enables the unit to sense whether the car is moving forwards or backwards.
Connection method
1. Clamp the lead.
To video output
8 m
2.Clamp firmly with
Note:
•It is necessary to set CAMERA POLARITY properly in SYSTEM MENU when connecting the rear view camera.
7
<CRD4215-A> 8
ENG/MASTER 96 INST